From robin.listas at telefonica.net Wed Nov 1 05:41:35 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:04 2018 Subject: [Alpine-info] Is it possible to apply filters manually? In-Reply-To: References: Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Monday, 2017-10-30 at 09:05 -0600, Eduardo Chappa wrote: > On Mon, 30 Oct 2017, Carlos E. R. wrote: > >> It is simple: it triggers on the existence of a header that identifies the >> mail list, then it adds a "Reply-To" header (saving the old one if it >> exists) so that a reply to that post goes direct to the mail list instead >> of to the poster. This is needed because Alpine does not have a "Reply to >> mail list" button, and some mail lists complain if one answers both to >> mail list and poster. >> >> How could I acchieve that, manipulating a header in the filtered post? > > Dear Carlos, > > this is interesting, but this is where filtering and delivering differ. > However, I have a suggestion at the end. > > What you are attempting to do is to modify the message. In an ideal world, > what one would like to happen is that message number 1 in the folder be > applied the procmail rule and remain message number 1 in that folder. What > procmail does is to change the message before it becomes message number 1. > > This makes a difference, because when you open a folder using IMAP the > message is processed and header information is passed to the client. The > client is supposed to save that information. The information on headers is > not modifiable according to the standard (e.g. who sent the message, what the > subeject was, etc.) I do not know of any IMAP command that says "I rescaned > the folder and I got new headers information. Save this new information and > discard the old one." > > In essence what you want to do, that would follow the IMAP logic, is to > modify and existent message and create a new message by doing that, so > message number 1 could be message number 5 now. You might think that this is > not an issue, because you could make message 5 to be message 1 by deleting > enough messages, but that is not the issue. In IMAP every message has a > Unique IDentifier (UID) which does not change, so the message with UID 1 and > the message with UID 5 are different. It is necessary to have UID so that > certain operations on messages succeed. Well, the filter action moves the email to a different folder, so this is perhaps not an issue - assuming the uid is only unique per folder, which I do not know if it is. > So what we have so far is that by applying filters to a folder in Alpine > that modify headers, you need to create a message with a new UID, a new > message after all. This is what happens when you delete an attachment from a > message, for example. That's why you are not going to find this operation in > the filter section. > > When you are delivering a message the previous issue does not happen, > because the message is not in the folder in the first place, so there is no > issue about if you are modifying an existing message or not. > > Here is something you might try though. I have not tested this, but might > do what you want to do. > > See if you can accomplish what you want by piping your message to procmail. > You could even use aggregate operations to pipe your messages all at once. > > I hope my explanation was clear enough. Yes, it is, thanks. You mention piping the message to procmail - but I do not see how to do that as part of a filter action. If you mean independently, outside, then yes, of course, that is how I already do it: fetchmail -> postfix -> procmail -> dovecot. but when doing so, the "answered" flag is lost. Would it be possible to add to Alpine the "reply to mail list" function? When hit Reply, ask All, List, sender, reply-to header? With that functionality, my problem would be solved immediately. ;-) - -- Cheers, Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAln5wP8ACgkQtTMYHG2NR9UucwCcCBTQi01gyM66T50jF4oPV3zx PSMAnRDaZ1gTpXX72jrVQGFSwEA1yuIg =Y/e2 -----END PGP SIGNATURE----- From robin.listas at telefonica.net Wed Nov 1 05:53:36 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:04 2018 Subject: [Alpine-info] Problem with hibernation - feature request Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I noticed that Alpine is not aware of hibernation/sleep of the machine. When my machine returns from hibernation, the last opened folder (on local dovecot-imap) is closed "due to an error" or similar words. I simply "Enter" to open it again and done. Fast. But now that I added a remote folder on my ISP, the issue becomes a little nuisance. I get a message at the bottom of the terminal that says: [No reply in 808 seconds from server imap.telefonica.net. Still Waiting...] After a some seconds (30?), during which the keyboard does not respond (control-c is also ignored) I get another message: No reply in 829 seconds from server imap.telefonica.net. Break connection? Now I must hit "N" within a few seconds, or the loop continues. The "sleep" situation could be detected by tracking the clock, it jumps hours, but perhaps there is another method. Dovecot tracks the clock: I know because it says so in the log: <2.4> 2017-11-01 12:19:21 Telcontar dovecot - - - imap: Warning: Time jumped forwards 62506 seconds <2.4> 2017-11-01 12:19:21 Telcontar dovecot - - - imap: Warning: Time jumped forwards 64280 seconds <2.4> 2017-11-01 12:19:21 Telcontar dovecot - - - message repeated 2 times: [ imap: Warning: Time jumped forwards 64280 seconds] <2.6> 2017-11-01 12:19:21 Telcontar dovecot - - - imap(cer): Disconnected for inactivity in=1220 out=40686 Otherwise, some method to make easier breaking the loop? - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAln5w9AACgkQtTMYHG2NR9UhfQCghbXuwhB1EqmDKeMietN5/RrS WEEAn0e8N0r6bLEZTrvZUe6c4CMtWjdS =NToq -----END PGP SIGNATURE----- From alpine.chappa at gmx.com Wed Nov 1 07:13:31 2017 From: alpine.chappa at gmx.com (Eduardo Chappa) Date: Tue Jun 12 15:15:04 2018 Subject: [Alpine-info] Is it possible to apply filters manually? In-Reply-To: References: Message-ID: On Wed, 1 Nov 2017, Carlos E. R. wrote: > Well, the filter action moves the email to a different folder, so this > is perhaps not an issue - assuming the uid is only unique per folder, > which I do not know if it is. Yes, UID is unique per folder. > You mention piping the message to procmail - but I do not see how to do > that as part of a filter action. I was thinking of aggregate operations. One of the actions of aggregate operations is to pipe the messages to an external program. > If you mean independently, outside, then yes, of course, that is how I > already do it: > > fetchmail -> postfix -> procmail -> dovecot. > > but when doing so, the "answered" flag is lost. Now that I think about it, I think you will lose the Answered flag by doing the piping too. The Answered flag is part of an internal header, that I believe it is not passed to the pipe command. > Would it be possible to add to Alpine the "reply to mail list" function? > When hit Reply, ask All, List, sender, reply-to header? > > With that functionality, my problem would be solved immediately. ;-) That's a major change to an already existing command to which I do not read the prompt anymore. I imagine many users do not read the prompt anymore either, so my concern is how to do this in a way in which everyone is happy. Let me think about it. -- Eduardo http://alpine.freeiz.com/alpine/ (Web) http://repo.or.cz/alpine.git (Git) RSS: http://alpine.freeiz.com/alpine/alpine.xml (Web updates) RSS: http://repo.or.cz/alpine.git/rss (Git updates) From alpine.chappa at gmx.com Wed Nov 1 07:28:01 2017 From: alpine.chappa at gmx.com (Eduardo Chappa) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Problem with hibernation - feature request In-Reply-To: References: Message-ID: On Wed, 1 Nov 2017, Carlos E. R. wrote: > I get a message at the bottom of the terminal that says: > > [No reply in 808 seconds from server imap.telefonica.net. > Still Waiting...] I've always considered excessive to wait for that long to break a connection. Waiting for this long causes other connections to fail, because as you say, Alpine is waiting for that connection to come back, and so it loses track of any other connections that are open. I set my timeouts low because I do not want Alpine to lock on me while I wait. TCP Open Timeout = TCP Read Warning Timeout = 6 TCP Write Warning Timeout = 15 TCP Query Timeout = 5 In my opinion Alpine should have a setting that says that "if this many seconds have elapsed" then the connections should be broken. I do not know of any operation on IMAP that lasts 800 seconds, so probably 800 seconds is already excessive to wait for, but that is where the issue lies. > Otherwise, some method to make easier breaking the loop? As I said before, what I do is to keep the timeouts low. However, I hvae to remember that low timeouts will make the timeouts trigger during normal operations, so I have to remember not to cut the connection while I have a command in progress.... -- Eduardo http://alpine.freeiz.com/alpine/ (Web) http://repo.or.cz/alpine.git (Git) RSS: http://alpine.freeiz.com/alpine/alpine.xml (Web updates) RSS: http://repo.or.cz/alpine.git/rss (Git updates) From lucio at lambrate.inaf.it Thu Nov 2 02:06:10 2017 From: lucio at lambrate.inaf.it (Lucio Chiappetti) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Is it possible to apply filters manually? In-Reply-To: References: Message-ID: On Wed, 1 Nov 2017, Carlos E. R. wrote: > You mention piping the message to procmail - but I do not see how to do > that as part of a filter action. I haven't followed this thread in detail, and never used filters, however I use key definitions (not sure whether they require an alpine patch) to trigger (manually but with one keystroke) some actions (like saving a message to a spam folder, moving the spam folder to a systemwide area where a sysadmin crontab will pick it up for spamassassin learn, or splitting a MIME digest into individual messages in a temp folder). Some of these action call external shell scripts, and in particular the digest splitter calls a one liner script which uses formail, which is an utility of the procmail suite -- Lucio Chiappetti - INAF/IASF - via Bassini 15 - I-20133 Milano (Italy) For more info : http://www.iasf-milano.inaf.it/~lucio/personal.html From robin.listas at telefonica.net Thu Nov 2 03:20:05 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Is it possible to apply filters manually? In-Reply-To: References: Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Thursday, 2017-11-02 at 10:06 +0100, Lucio Chiappetti wrote: > On Wed, 1 Nov 2017, Carlos E. R. wrote: > >> You mention piping the message to procmail - but I do not see how to do >> that as part of a filter action. > > I haven't followed this thread in detail, and never used filters, however I > use key definitions (not sure whether they require an alpine patch) to > trigger (manually but with one keystroke) some actions (like saving a message > to a spam folder, moving the spam folder to a systemwide area where a > sysadmin crontab will pick it up for spamassassin learn, or splitting a MIME > digest into individual messages in a temp folder). > > Some of these action call external shell scripts, and in particular the > digest splitter calls a one liner script which uses formail, which is an > utility of the procmail suite How is the feature called, in which menu do you set it up? The problem is that it would not be a single formail command, but a different one for each filter. Dozens. - -- Cheers, Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAln68VUACgkQtTMYHG2NR9W/dwCfV3qS60Zbqv/7HxazvPFsineU t7gAn3JNvjXELSs3CLNcdcq2In1Ei+dH =0PM2 -----END PGP SIGNATURE----- From alpine.chappa at gmx.com Thu Nov 2 19:46:12 2017 From: alpine.chappa at gmx.com (Eduardo Chappa) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Is it possible to apply filters manually? In-Reply-To: References: Message-ID: On Thu, 2 Nov 2017, Lucio Chiappetti wrote: > I haven't followed this thread in detail, and never used filters, > however I use key definitions (not sure whether they require an alpine > patch) to trigger (manually but with one keystroke) some actions (like > saving a message to a spam folder, moving the spam folder to a > systemwide area where a sysadmin crontab will pick it up for > spamassassin learn, or splitting a MIME digest into individual messages > in a temp folder). Yes, this requires a patch. The patch is available here: http://alpine.freeiz.com/alpine/info/rules.html It is also included as part of the all.patch at http://alpine.freeiz.com/alpine/info/all.html -- Eduardo http://bit.ly/2vyvUeF (Web) http://repo.or.cz/alpine.git (Git) RSS: http://bit.ly/2vyL1oo (Web updates) RSS: http://repo.or.cz/alpine.git/rss (Git updates) From lucio at lambrate.inaf.it Fri Nov 3 02:13:05 2017 From: lucio at lambrate.inaf.it (Lucio Chiappetti) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Is it possible to apply filters manually? In-Reply-To: References: Message-ID: On Thu, 2 Nov 2017, Carlos E. R. wrote: > How is the feature called, in which menu do you set it up? it is called "Key Definition Rules" ... I cannot remember which menu I used when I set it up, I can see it with M S C ... and yes, as said by Eduardo Chappa in another message, it is a patch to Alpine (I have almost all installed so I keep forgetting) > The problem is that it would not be a single formail command, but a > different one for each filter. Dozens. Hmm ... I wonder whether you could'nt offload the branching outside of pine (in the script, be it shell script, awk or your favourite scripting language, or in procmail rules). I also remind that one can use the Alpine "pipe" (|) command to feed a message to an external script. I do sporadically use it manually (e.g. to extract the MX the message comes from via the analysis awk script described in http://sax.iasf-milano.inaf.it/~lucio/Procmail/received.html) One can combine the key definition with a pipe (that's how my splitdigest script works) -- Lucio Chiappetti - INAF/IASF - via Bassini 15 - I-20133 Milano (Italy) For more info : http://www.iasf-milano.inaf.it/~lucio/personal.html From robin.listas at telefonica.net Fri Nov 3 04:21:57 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Is it possible to apply filters manually? In-Reply-To: References: Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Friday, 2017-11-03 at 10:13 +0100, Lucio Chiappetti wrote: > On Thu, 2 Nov 2017, Carlos E. R. wrote: > >> How is the feature called, in which menu do you set it up? > > it is called "Key Definition Rules" ... I cannot remember which menu I used > when I set it up, I can see it with M S C > > ... and yes, as said by Eduardo Chappa in another message, it is a patch to > Alpine (I have almost all installed so I keep forgetting) > >> The problem is that it would not be a single formail command, but a >> different one for each filter. Dozens. > > Hmm ... I wonder whether you could'nt offload the branching outside of pine > (in the script, be it shell script, awk or your favourite scripting language, > or in procmail rules). > > I also remind that one can use the Alpine "pipe" (|) command to feed a > message to an external script. I do sporadically use it manually (e.g. to > extract the MX the message comes from via the analysis awk script described > in http://sax.iasf-milano.inaf.it/~lucio/Procmail/received.html) > > One can combine the key definition with a pipe (that's how my splitdigest > script works) The thing is, I have a fully working solution, which I have been using for many years: fetchmail --> postfix (etc) --> procmail --> storage. The only remaining snag is that when I read posts directly from my ISP IMAP folder, as I'm doing now, be it with Thunderbird or Alpine, and later fetch the emails with fetchmail, all flags such as those that indicate that a post has already been read, are lost. Thus my testing of Alpine filters. I can, for instance, move posts from the ISP folder to a local folder, an action that automatically trigers filters in that local folder, moving the posts to the appropriate folder. That also works. But there is another snag: I need to add a reply-to header to every post on every mail list, so that a "Reply" goes to the list only. This I have solved with my fetchmail-procmail route, but not with alpine filtering. The real solution would be for Alpine to have added that feature (Reply-to-list), that would be fantastic. I can't do piping plus filters, because that solution needs both to have definitions for each different mail list, doubling the configuration effort: mark a hundred messages pipe externally Process one email: identify the mail list add the correct reply-to header move to a single folder filter to the addequate folder (one filter per mail list). or a variation of the above: mark a hundred messages pipe externally Process one email: identify the mail list add the correct reply-to header move (externally) to the addequate folder It might be multiple selection of many messages, then piping them all to procmail. This would duplicate my current process of fetchmail-procmail, so I would only do it IF the process keeps the read marks. Does it? Where are read marks stored? In the messages themselves? Or in the IMAP server index structure? That would be another route: if I can externally identify if a post has been marked read, then move to the addecuate folder and mark it read or not. - -- Cheers, Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAln8UVUACgkQtTMYHG2NR9VuIACfeIKbFI3SHczeUBGDdbjOmlcD /V8AnjJWYJTxDECz2egY2qoBP7uJPJkr =ScUG -----END PGP SIGNATURE----- From libor_k_73 at hotmail.com Tue Nov 7 08:24:18 2017 From: libor_k_73 at hotmail.com (L. K.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Alpine SSL/TLS problem on Windows XP. In-Reply-To: References: Message-ID: > Hello, > I have been using Pine and Alpine for years on Windows XP. Now our mailserver was upgraded from Debian 8 (Jessie) to Debian 9 (Stretch) and Alpine says > "There was an SSL/TLS failure for the server". > I suppose, that Windows XP are reason for this. My colleague has the same version of Alpine (2.20) with the same configuration on Windows 7 and has > no problem. Moreover, Debian release notes say "The 3DES and RC4 ciphers are no longer available for TLS/SSL communication. ... This means that OpenSSL and Windows XP share no common cipher. " > So my questions are: > 1) Does the Alpine rely on system regarding SSL/TLS? (Thunderbird has no problem on Windows XP against Debian 9, tested versions 2.0.0.23, 38.5.0, 45.8.0, 52.2.1, also Firefox has no problem, while Microsoft Internet Explorer or Microsoft Outlook does have.) > 2) If so, is there any way how to allow Alpine work against Debian 9 on Windows XP? > ?My configuration for IMAP is like ourimap.server.cz/ssl/novalidate-cert/user=my_username . While Thunderbird is able to connect with our mailserver using SSL/TLS or STARTTLS, no different setting of Alpine was successful... Hello, if somebody had the same problem, I have found solutions: 1) Unofficial AES256 upgrade for Windows XP does exist. Quick and easy :-) Only three .dll files has to be upgraded and that's all... http://www.skaip.org/aes-256-for-windows-xp in the pinerc file works ourimap.server.cz/ssl/novalidate-cert/... or ourimap.server.cz/tls1/novalidate-cert/... 2) Unofficial Service Pack SP4 for Windows XP includes 1) https://ryanvm.net/forum/viewtopic.php?t=10321 3) Under Windows 2000 I used stunnel: https://www.stunnel.org/index.html stunnel.conf: [our-imap] client = yes accept = 127.0.0.1:143 connect = ourimap.server.cz:993 verifyChain = yes CAfile = ca-certs.pem checkHost = ourimap.server.cz OCSPaia = yes pinerc : 127.0.0.1:143/notls/novalidate-cert/... Alpine (at least 2.20) does not work under Windows 2000, so I use old Pine 4.64 . From lucio at lambrate.inaf.it Fri Nov 10 02:22:04 2017 From: lucio at lambrate.inaf.it (Lucio Chiappetti) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] cannot include original message in reply Message-ID: I have received one mail (which Alpine visualizes OK) to which I want to reply including part of its text (as I usually do, trimming the sentences to which I reply), but Alpine gives me this line instead of including the text prefixed with ">": [NON-Text Body part not included] I suspect this might be the fault of the sender. The message looks composed by a Zimbra mailer, and appears in the "attachment index" (command V) as 1.1 ~92 lines Text/PLAIN (at the bottom the following line is displayed Message 131 has only one part (the message body), and no attachments. If I do H and look at the full message text I see Content-Type: multipart/alternative; boundary="=_f57252d6-c0ba-4790-a95b-142f00d15b1c" X-Mailer: Zimbra 8.7.11_GA_1854 (ZimbraWebClient - SAF10.1 (Mac)/8.7.11_GA_1854) and then --=_f57252d6-c0ba-4790-a95b-142f00d15b1c Content-Type: multipart/related; boundary="=_3f003649-fe91-47ea-b76c-64d4a8713b8f" --=_3f003649-fe91-47ea-b76c-64d4a8713b8f Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable then the message and finally --=_3f003649-fe91-47ea-b76c-64d4a8713b8f-- --=_f57252d6-c0ba-4790-a95b-142f00d15b1c-- I suspect some form of mis-configuration in the sender's mailer. Can anybody confirm and suggest possible workaround ? Other than saving the message standalone to a folder, and editing it removing all the MIME lines above (that works). -- Lucio Chiappetti - INAF/IASF - via Bassini 15 - I-20133 Milano (Italy) For more info : http://www.iasf-milano.inaf.it/~lucio/personal.html ------------------------------------------------------------------------ "There Is No Cloud It's Just Someone Else's Computer. Non esiste 'il cloud'; e' solo il computer di qualcun altro" From kgeorge at tcpsoft.com Sun Nov 12 19:58:12 2017 From: kgeorge at tcpsoft.com (Kyle George) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] [PATCH] Fix TLS 1.2 regression when openssl >= 1.1.0 Message-ID: * symptom: TLS 1.2 works (e.g., connection string containing "/tls1_2") with openssl < 1.1.0, but not with openssl >= 1.1.0. Confusingly, running Alpine with -supported argument shows TLSv1.2 support, and the generated docs show "/tls1_2" support. (I noticed this issue when upgrading a machine from Debian 7 to Debian 9 and moving to openssl 1.1.0. My Debian 7-compiled binaries worked fine on Debian 9 until I recompiled Alpine on Debian 9 with openssl 1.1.0.) * diagnosis: SSL_SUPPORTS_TLSV1_2 is getting defined by configure, but c-client TLSV1_2 is not. Alpine thinks TLSv1.2 support is present but c-client code rejects connection strings containing "/tls1_2" (and "/tls1_1"). Changing connection strings to "/tls" works, and results in the use of TLS_client_method() in openssl 1.1.0 which will negotiate the highest version supported by client and server. However, the use of "/tls1_2" indicates that the Alpine user requires TLS 1.2 and "/tls" doesn't do this. * fix: Bug appears to have been introduced in be296fed when support for openssl >= 1.1.0 was added. The diff for this commit shows that c-client TLSV1_2 is only defined when running on an "old" (< 1.1.0) version of openssl. So add the definition of TLSV1_2 to the new openssl section in configure.ac. This simple change made to configure.ac, with configure regenerated with autoconf, fixes the problem. * tl;dr: long commit message for a simple fix to restore explicit TLS 1.2 support ("/tls1_2") when using openssl >= 1.1.0. --- configure | 15 ++++++++++++++- configure.ac | 1 + 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/configure b/configure index c1c2958..86d180f 100755 --- a/configure +++ b/configure @@ -782,6 +782,7 @@ infodir docdir oldincludedir includedir +runstatedir localstatedir sharedstatedir sysconfdir @@ -969,6 +970,7 @@ datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' +runstatedir='${localstatedir}/run' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' @@ -1221,6 +1223,15 @@ do | -silent | --silent | --silen | --sile | --sil) silent=yes ;; + -runstatedir | --runstatedir | --runstatedi | --runstated \ + | --runstate | --runstat | --runsta | --runst | --runs \ + | --run | --ru | --r) + ac_prev=runstatedir ;; + -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ + | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ + | --run=* | --ru=* | --r=*) + runstatedir=$ac_optarg ;; + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ @@ -1358,7 +1369,7 @@ fi for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir + libdir localedir mandir runstatedir do eval ac_val=\$$ac_var # Remove trailing slashes. @@ -1511,6 +1522,7 @@ Fine tuning of the installation directories: --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] @@ -18694,6 +18706,7 @@ else fi if test "x$alpine_SSLTYPE" != "xnone" ; then + alpine_c_client_cflags="$alpine_c_client_cflags -DTLSV1_2" $as_echo "#define SSL_SUPPORTS_TLSV1_2 1" >>confdefs.h diff --git a/configure.ac b/configure.ac index 8266684..4c05832 100644 --- a/configure.ac +++ b/configure.ac @@ -1481,6 +1481,7 @@ if test "x$alpine_SSLTYPE" != "xnone" ; then AC_SEARCH_LIBS(TLS_client_method,ssl,, [ alpine_SSLTYPE="none"]) AC_SEARCH_LIBS(DTLS_client_method,ssl,,[ alpine_SSLTYPE="none"]) if test "x$alpine_SSLTYPE" != "xnone" ; then + alpine_c_client_cflags="$alpine_c_client_cflags -DTLSV1_2" AC_DEFINE([SSL_SUPPORTS_TLSV1_2], [1], [SSL Supports TLSV1.2]) fi fi -- 2.11.0 From alpine.chappa at gmx.com Sun Nov 12 23:03:30 2017 From: alpine.chappa at gmx.com (Eduardo Chappa) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] [PATCH] Fix TLS 1.2 regression when openssl >= 1.1.0 In-Reply-To: References: Message-ID: On Sun, 12 Nov 2017, Kyle George wrote: > * symptom: TLS 1.2 works (e.g., connection string containing "/tls1_2") > with openssl < 1.1.0, but not with openssl >= 1.1.0. Thank you Kyle for the report and the fix. I appreciate it. -- Eduardo http://bit.ly/2vyvUeF (Web) http://repo.or.cz/alpine.git (Git) RSS: http://bit.ly/2vyL1oo (Web updates) RSS: http://repo.or.cz/alpine.git/rss (Git updates) From robin.listas at telefonica.net Mon Nov 13 03:06:38 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Displaying attachments Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I noticed that I can't display attachments. On a mail that has this: 1 ~48 lines Text/PLAIN 2 145 KB Image/PNG (Name: "csm_Quoellfrisch50cl_prod_c5f1b794b9.png") On attempt to display I get: [Don't know how to display Image/PNG attachments. Try Save.] I thought that maybe the case was not matching, but then I noticed that I no longer have an "/etc/mailcap" file. The distribution (openSUSE) removed it, I understand. Is it that file, or is it something else? If it is that file, what can I do? - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAloJfMQACgkQtTMYHG2NR9WfHgCeKpVZnt09DscYXcZOxdshOO9i ilUAnA742b96yUXejnMLBuWPrjCWzkeX =WfhF -----END PGP SIGNATURE----- From robin.listas at telefonica.net Mon Nov 13 03:16:51 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Problem with hibernation - feature request In-Reply-To: References: Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Wednesday, 2017-11-01 at 08:28 -0600, Eduardo Chappa wrote: > On Wed, 1 Nov 2017, Carlos E. R. wrote: > >> I get a message at the bottom of the terminal that says: >> >> [No reply in 808 seconds from server imap.telefonica.net. >> Still Waiting...] > > I've always considered excessive to wait for that long to break a connection. > Waiting for this long causes other connections to fail, because as you say, > Alpine is waiting for that connection to come back, and so it loses track of > any other connections that are open. I set my timeouts low because I do not > want Alpine to lock on me while I wait. > > TCP Open Timeout = > TCP Read Warning Timeout = 6 > TCP Write Warning Timeout = 15 > TCP Query Timeout = 5 I see those vars in the .pinerc, but not when I open Setup/Config menu :-? # Sets the time in seconds that Pine will attempt to open a network # connection. The default is 30, the minimum is 5, and the maximum is # system defined (typically 75). tcp-open-timeout= # Network read warning timeout. The default is 15, the minimum is 5, and the # maximum is 1000. tcp-read-warning-timeout= # Network write warning timeout. The default is 0 (unset), the minimum # is 5 (if not 0), and the maximum is 1000. tcp-write-warning-timeout= # If this much time has elapsed at the time of a tcp read or write # timeout, pine will ask if you want to break the connection. # Default is 60 seconds, minimum is 5, maximum is 1000. tcp-query-timeout= I'll set the later to 15 for the moment. > In my opinion Alpine should have a setting that says that "if this many > seconds have elapsed" then the connections should be broken. I do not know of > any operation on IMAP that lasts 800 seconds, so probably 800 seconds is > already excessive to wait for, but that is where the issue lies. Why not break all connections on suspend/hibernate? - -- Cheers, Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAloJfyMACgkQtTMYHG2NR9XRFwCfR7TQO33ngj4vH1u3CfGLBVcO 0KYAniqQNRmVFOk+JV9FLacyIay4DOxb =QXLp -----END PGP SIGNATURE----- From schamane at fam.tuwien.ac.at Mon Nov 13 03:46:41 2017 From: schamane at fam.tuwien.ac.at (Andreas Schamanek) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Displaying attachments In-Reply-To: References: Message-ID: On Mon, 13 Nov 2017, at 12:06, Carlos E. R. wrote: > no longer have an "/etc/mailcap" file. The distribution (openSUSE) > removed it, I understand. > > Is it that file, or is it something else? It's that file. > If it is that file, what can I do? Restore it from a backup, get it from somewhere, or, if you have no root access, copy it to $HOME/.mailcap -- -- Andreas :-) From dennisdavis at fastmail.fm Mon Nov 13 06:08:09 2017 From: dennisdavis at fastmail.fm (Dennis Davis) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Problem with hibernation - feature request In-Reply-To: References: Message-ID: On Mon, 13 Nov 2017, Carlos E. R. wrote: > From: Carlos E. R. > To: Alpine-info > Date: Mon, 13 Nov 2017 12:16:51 +0100 (CET) > Subject: Re: [Alpine-info] Problem with hibernation - feature request > > On Wednesday, 2017-11-01 at 08:28 -0600, Eduardo Chappa wrote: ... > > TCP Open Timeout = > > TCP Read Warning Timeout = 6 > > TCP Write Warning Timeout = 15 > > TCP Query Timeout = 5 > > I see those vars in the .pinerc, but not when I open Setup/Config > menu :-? Those, and some other, configuration variables are normally hidden as you often don't need to change the defaults. Or you can end up with a non-workng configuration if inappropriate changes are made. Set this configuration variable: [X] Expose Hidden Config and you should see them. -- Dennis Davis From robin.listas at telefonica.net Mon Nov 13 06:16:31 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Problem with hibernation - feature request In-Reply-To: References: Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 El 2017-11-13 a las 14:08 -0000, Dennis Davis escribi?: > On Mon, 13 Nov 2017, Carlos E. R. wrote: >> On Wednesday, 2017-11-01 at 08:28 -0600, Eduardo Chappa wrote: > Those, and some other, configuration variables are normally hidden > as you often don't need to change the defaults. Or you can end up > with a non-workng configuration if inappropriate changes are made. > Set this configuration variable: > > [X] Expose Hidden Config > > and you should see them. I was looking for that, but I could not remember the name. I searched for "expert" settings. I also looked at the end of the config dislay, but it is not there, it is somewhere in the middle. - -- Cheers Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iF4EAREIAAYFAloJqT8ACgkQja8UbcUWM1wfbwEAnvpGURWBNFXF1ShZVuXM1dhH vRMvuPi0q5E9L8ofDGMA/22C35Yuoy2XlPIUkZ4zQx/pfnxNrrrlECTF3KWZYC/8 =md+l -----END PGP SIGNATURE----- From mattack at apple.com Mon Nov 13 11:34:36 2017 From: mattack at apple.com (Matt Ackeret) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Problem with hibernation - feature request In-Reply-To: References: Message-ID: On Mon, 13 Nov 2017, Carlos E. R. wrote: > Why not break all connections on suspend/hibernate? This isn't really an answer, but that would have to be an OS-specific patch, since there's no standard for this thing, so e.g. it'd have to be different for Mac or Linux or Windows.. (Unless for the first two, there is some lower level UNIX signal sent to them?) From robin.listas at telefonica.net Tue Nov 14 12:59:49 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Time display Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, is there a configuration combination that would show local time in the index display, and the original time + timezone when displaying a message? - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAloLWU0ACgkQtTMYHG2NR9Uy6gCfZIp+WgSOTTP0CPm5CCz/bXd0 pT8AnjXVUs+bVpQIXu6xprNb3J2Y5nMR =+8sb -----END PGP SIGNATURE----- From mbmiller+l at gmail.com Tue Nov 14 14:02:49 2017 From: mbmiller+l at gmail.com (Mike Miller) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] setting up IMAP Message-ID: I want to be able to access mail on one Linux box from another Linux box on my home network. I can ssh into the box and do it that way, but then I don't get links opening in a Chromium window. My first try was to use sshfs to mount the mail directory of the server, but that didn't work because of this locking issue: http://mailman13.u.washington.edu/pipermail/alpine-info/2009-February/001740.html The better solution is to use IMAP (possibly with ssh port forwarding of port 143): http://mailman13.u.washington.edu/pipermail/alpine-info/2009-February/001741.html What do you think? Is that my best plan? If so, it would be great if someone knew of a good web page that would walk me through setting that up. (I'm using Ubuntu 17.10, if that matters.) TIA. Mike From robin.listas at telefonica.net Tue Nov 14 15:44:06 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Problem with hibernation - feature request In-Reply-To: References: Message-ID: <89fdce5c-0446-ebb0-c8ef-f560bacb68f3@telefonica.net> On 2017-11-13 20:34, Matt Ackeret wrote: > On Mon, 13 Nov 2017, Carlos E. R. wrote: >> Why not break all connections on suspend/hibernate? > > This isn't really an answer, but that would have to be an OS-specific patch, > since there's no standard for this thing, so e.g. it'd have to be different > for Mac or Linux or Windows.. (Unless for the first two, there is some > lower level UNIX signal sent to them?) Good point. Well, it can be done "simply" by detecting a large time jump - that is what dovecot does. In the case of Windows, I seem to recall that there is an event message sent to applications when hibernation is going to happen. On Linux, I have seen one application (KeePassXC, a password manager) detect either it or the lock screen moment. I do not know if it depends on the desktop. The thing is, when I call hibernation it immediately locks the passwords access. Maybe systemd has an API for it, I don't know, nor whom to ask. -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 188 bytes Desc: OpenPGP digital signature URL: From mbmiller+l at gmail.com Tue Nov 14 15:54:42 2017 From: mbmiller+l at gmail.com (Mike Miller) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] setting up IMAP In-Reply-To: References: Message-ID: Let me know if you have any tips. I set up imap using these instructions: https://askubuntu.com/questions/346528/easiest-way-to-set-up-an-imap-mail-server I left off the pop3. I made appropriate edits to .pinerc, I think, because it seems to be working. Next I forwarded local port 143 to port 143 on the server machine. One problem -- I frequently get this message when changing folders: [The authenticity of host 'localhost (127.0.0.1)' can't be established. ECDSA key fingerprint is SHA256:Xg9gYL4r/k8OX2RjGb [>SECURITY PROBLEM: insecure server advertised AUTH=PLAIN<] Are you sure you want to continue connecting (yes/no)? I found something out there about PHP, but I guess I can't use that. Any ideas? It isn't a big deal, though. It only lingers for a few seconds. Mike On Tue, 14 Nov 2017, Mike Miller wrote: > I want to be able to access mail on one Linux box from another Linux box on > my home network. I can ssh into the box and do it that way, but then I don't > get links opening in a Chromium window. My first try was to use sshfs to > mount the mail directory of the server, but that didn't work because of this > locking issue: > > http://mailman13.u.washington.edu/pipermail/alpine-info/2009-February/001740.html > > The better solution is to use IMAP (possibly with ssh port forwarding of port > 143): > > http://mailman13.u.washington.edu/pipermail/alpine-info/2009-February/001741.html > > What do you think? Is that my best plan? If so, it would be great if > someone knew of a good web page that would walk me through setting that up. > (I'm using Ubuntu 17.10, if that matters.) > > TIA. > > Mike > From robin.listas at telefonica.net Wed Nov 15 05:42:35 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Problem with hibernation - feature request In-Reply-To: <89fdce5c-0446-ebb0-c8ef-f560bacb68f3@telefonica.net> References: <89fdce5c-0446-ebb0-c8ef-f560bacb68f3@telefonica.net> Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 El 2017-11-15 a las 00:44 +0100, Carlos E. R. escribi?: > On 2017-11-13 20:34, Matt Ackeret wrote: >> On Mon, 13 Nov 2017, Carlos E. R. wrote: > Maybe systemd has an API for it, I don't know, nor whom to ask. I found some info, for user/admin, not API: Create /etc/systemd/system/suspend@.service [Unit] Description=User suspend actions Before=sleep.target [Service] User=%I Type=forking Environment=DISPLAY=:0 ExecStartPre= -/usr/bin/pkill -u %u unison ; /usr/local/bin/music.sh stop ; /usr/bin/mysql -e 'slave stop' ExecStart=/usr/bin/sflock ExecStartPost=/usr/bin/sleep 1 [Install] WantedBy=sleep.target That is, we can call a command when the machine is going to suspend. Source: - -- Cheers Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iF4EAREIAAYFAloMRFIACgkQja8UbcUWM1yetgD/VT8n14xSihaP/ViDyXLkO+rY t/LZM8hu5v66YdN6u6AA+gKzkHc8wA9fNvHJbbjsLPMfXQtHBnVXHwd14dI0w/xU =r9I0 -----END PGP SIGNATURE----- From htodd at twofifty.com Sat Nov 18 08:18:35 2017 From: htodd at twofifty.com (Hisashi T Fujinaka) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] HEAD doesn't compile on netbsd-8.0_beta-amd64 Message-ID: git bisect points to c83adefd0bb6c1099b896dab361a1b2b8c504766 * TLS 1.2 works does not work if Alpine is compiled with openssl >= 1.1.0. Reported and patched by Kyle George. Here's where it fails. mv -f .deps/help_h_gen.Tpo .deps/help_h_gen.Po /bin/sh ../libtool --tag=CC --mode=link gcc -g -pthread -g -O2 -L/usr/lib -o help_h_gen help_h_gen.o libtool: Version mismatch error. This is libtool 2.4.6, but the libtool: definition of this LT_INIT comes from libtool 2.4.2. libtool: You should recreate aclocal.m4 with macros from libtool 2.4.6 libtool: and run autoconf again. *** Error code 63 Stop. make[2]: stopped in /home/htodd/alpine/pith *** Error code 1 Stop. make[1]: stopped in /home/htodd/alpine *** Error code 1 Stop. make: stopped in /home/htodd/alpine -- Hisashi T Fujinaka - htodd@twofifty.com BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee From dennisdavis at fastmail.fm Sat Nov 18 13:16:38 2017 From: dennisdavis at fastmail.fm (Dennis Davis) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] HEAD doesn't compile on netbsd-8.0_beta-amd64 In-Reply-To: References: Message-ID: On Sat, 18 Nov 2017, Hisashi T Fujinaka wrote: > From: Hisashi T Fujinaka > To: alpine-info@u.washington.edu > Date: Sat, 18 Nov 2017 08:18:35 -0800 (PST) > Subject: [Alpine-info] HEAD doesn't compile on netbsd-8.0_beta-amd64 > > git bisect points to c83adefd0bb6c1099b896dab361a1b2b8c504766 > > * TLS 1.2 works does not work if Alpine is compiled with openssl >= 1.1.0. > Reported and patched by Kyle George. > > Here's where it fails. > > mv -f .deps/help_h_gen.Tpo .deps/help_h_gen.Po > /bin/sh ../libtool --tag=CC --mode=link gcc -g -pthread -g -O2 > -L/usr/lib -o help_h_gen help_h_gen.o > libtool: Version mismatch error. This is libtool 2.4.6, but the > libtool: definition of this LT_INIT comes from libtool 2.4.2. > libtool: You should recreate aclocal.m4 with macros from libtool 2.4.6 > libtool: and run autoconf again. > *** Error code 63 > > Stop. > make[2]: stopped in /home/htodd/alpine/pith ... Saw the same problem on OpenBSD. Try running "autoconf" in the main alpine directory and starting again, rerunning "configure" and the compilation. This worked for me. -- Dennis Davis From alpine.chappa at gmx.com Sun Nov 19 11:02:10 2017 From: alpine.chappa at gmx.com (Eduardo Chappa) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] HEAD doesn't compile on netbsd-8.0_beta-amd64 In-Reply-To: References: Message-ID: On Sat, 18 Nov 2017, Dennis Davis wrote: > Saw the same problem on OpenBSD. Try running "autoconf" in the main > alpine directory and starting again, rerunning "configure" and the > compilation. This worked for me. Thank you Dennis for looking into this. I am not completely sure I know what happened. After I made the change to configure.ac, I run $ autoreconf -i -f and then I did the commit. For some reason this did not completely work, and another invocation of the autoconf command was needed. If I just had tried to compile Alpine after the commit, I would have seen the issue, but I did not, so that's my bad. At the time when Andra? Levstik lead the re-alpine project he did not want the configure script to be part of the distributed files in the git repository, and I certainly see why. The problam I had at the time is that I had no way to generate it. I use the same command as is used in re-alpine to generate the configure script but somehow this did not work... I appreciate the report that somehow the generated scripts did not work. I have made additional changes to configure.ac, and therefore to the configure script. I hope this time it will all work out smoothly. -- Eduardo http://bit.ly/2vyvUeF (Web) http://repo.or.cz/alpine.git (Git) RSS: http://bit.ly/2vyL1oo (Web updates) RSS: http://repo.or.cz/alpine.git/rss (Git updates) From htodd at twofifty.com Sun Nov 19 16:57:46 2017 From: htodd at twofifty.com (Hisashi T Fujinaka) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] HEAD doesn't compile on netbsd-8.0_beta-amd64 In-Reply-To: References: Message-ID: On Sun, 19 Nov 2017, Eduardo Chappa wrote: > I have made additional changes to configure.ac, and therefore to the > configure script. I hope this time it will all work out smoothly. Still didn't work. Here's the diff file from after I run autoconf on head. Maybe you need a newer autoconf? I'm really not very versed on autoconf. -- Hisashi T Fujinaka - htodd@twofifty.com BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee -------------- next part -------------- diff --git a/configure b/configure index 839abe6..85c138e 100755 --- a/configure +++ b/configure @@ -686,6 +686,7 @@ CP RM LIBTOOL_DEPS CPP +LT_SYS_LIBRARY_PATH OTOOL64 OTOOL LIPO @@ -810,6 +811,7 @@ enable_shared enable_static with_pic enable_fast_install +with_aix_soname with_gnu_ld with_sysroot enable_libtool_lock @@ -927,6 +929,7 @@ CFLAGS LDFLAGS LIBS CPPFLAGS +LT_SYS_LIBRARY_PATH CPP' @@ -1580,9 +1583,12 @@ Optional Packages: --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] + --with-aix-soname=aix|svr4|both + shared library versioning (aka "SONAME") variant to + provide on AIX, [default=aix]. --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-sysroot=DIR Search for dependent libraries within DIR - (or the compiler's sysroot if not specified). + --with-sysroot[=DIR] Search for dependent libraries within DIR (or the + compiler's sysroot if not specified). --with-gnu-ld assume the C compiler uses GNU ld default=no --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib --without-libiconv-prefix don't search for libiconv in includedir and libdir @@ -1765,6 +1771,8 @@ Some influential environment variables: LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory + LT_SYS_LIBRARY_PATH + User-defined run-time library search path. CPP C preprocessor Use these variables to override the choices made by `configure' or to help @@ -2793,7 +2801,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_config_headers="$ac_config_headers include/config.h" -am__api_version='1.13' +am__api_version='1.15' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do @@ -3014,7 +3022,7 @@ else $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; @@ -3342,8 +3350,8 @@ MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # mkdir_p='$(MKDIR_P)' -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' @@ -3359,6 +3367,48 @@ am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 @@ -4258,6 +4308,65 @@ ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" @@ -4835,8 +4944,8 @@ esac -macro_version='2.4.2' -macro_revision='1.3337' +macro_version='2.4.6' +macro_revision='2.4.6' @@ -4850,7 +4959,7 @@ macro_revision='1.3337' -ltmain="$ac_aux_dir/ltmain.sh" +ltmain=$ac_aux_dir/ltmain.sh # Backslashify metacharacters that are still active within # double-quoted strings. @@ -4899,7 +5008,7 @@ func_echo_all () $ECHO "" } -case "$ECHO" in +case $ECHO in printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 $as_echo "printf" >&6; } ;; print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 @@ -5222,19 +5331,19 @@ test -z "$GREP" && GREP=grep # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld -if test "$GCC" = yes; then +if test yes = "$GCC"; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw + # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; @@ -5248,7 +5357,7 @@ $as_echo_n "checking for ld used by $CC... " >&6; } while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done - test -z "$LD" && LD="$ac_prog" + test -z "$LD" && LD=$ac_prog ;; "") # If it fails, then pretend we aren't using GCC. @@ -5259,7 +5368,7 @@ $as_echo_n "checking for ld used by $CC... " >&6; } with_gnu_ld=unknown ;; esac -elif test "$with_gnu_ld" = yes; then +elif test yes = "$with_gnu_ld"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else @@ -5270,32 +5379,32 @@ if ${lt_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" + lt_cv_path_LD=$ac_dir/$ac_prog # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } @@ -5338,33 +5447,38 @@ if ${lt_cv_path_NM+:} false; then : else if test -n "$NM"; then # Let the user override the test. - lt_cv_path_NM="$NM" + lt_cv_path_NM=$NM else - lt_nm_to_check="${ac_tool_prefix}nm" + lt_nm_to_check=${ac_tool_prefix}nm if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" - break + break 2 ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" - break + break 2 ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but @@ -5375,15 +5489,15 @@ else esac fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : @@ -5489,9 +5603,9 @@ esac fi fi - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in *COFF*) - DUMPBIN="$DUMPBIN -symbols" + DUMPBIN="$DUMPBIN -symbols -headers" ;; *) DUMPBIN=: @@ -5499,8 +5613,8 @@ fi esac fi - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" + if test : != "$DUMPBIN"; then + NM=$DUMPBIN fi fi test -z "$NM" && NM=nm @@ -5540,7 +5654,7 @@ if ${lt_cv_sys_max_cmd_len+:} false; then : $as_echo_n "(cached) " >&6 else i=0 - teststring="ABCD" + teststring=ABCD case $build_os in msdosdjgpp*) @@ -5580,7 +5694,7 @@ else lt_cv_sys_max_cmd_len=8192; ;; - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` @@ -5630,22 +5744,23 @@ else ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then + if test -n "$lt_cv_sys_max_cmd_len" && \ + test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do + for i in 1 2 3 4 5 6 7 8; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough + test 17 != "$i" # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring @@ -5663,7 +5778,7 @@ else fi -if test -n $lt_cv_sys_max_cmd_len ; then +if test -n "$lt_cv_sys_max_cmd_len"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else @@ -5681,30 +5796,6 @@ max_cmd_len=$lt_cv_sys_max_cmd_len : ${MV="mv -f"} : ${RM="rm -f"} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 -$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 -$as_echo "$xsi_shell" >&6; } - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 -$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } -lt_shell_append=no -( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 -$as_echo "$lt_shell_append" >&6; } - - if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else @@ -5827,13 +5918,13 @@ esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in cygwin* | mingw* | pw32* | cegcc*) - if test "$GCC" != yes; then + if test yes != "$GCC"; then reload_cmds=false fi ;; darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + if test yes = "$GCC"; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi @@ -5961,13 +6052,13 @@ lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. +# 'unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) @@ -5994,8 +6085,7 @@ mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else @@ -6031,10 +6121,6 @@ freebsd* | dragonfly*) fi ;; -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - haiku*) lt_cv_deplibs_check_method=pass_all ;; @@ -6073,7 +6159,7 @@ irix5* | irix6* | nonstopux*) ;; # This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; @@ -6095,8 +6181,8 @@ newos6*) lt_cv_deplibs_check_method=pass_all ;; -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' @@ -6149,6 +6235,9 @@ sysv4 | sysv4.3*) tpf*) lt_cv_deplibs_check_method=pass_all ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; esac fi @@ -6306,8 +6395,8 @@ else case $host_os in cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib @@ -6319,7 +6408,7 @@ cygwin* | mingw* | pw32* | cegcc*) ;; *) # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" + lt_cv_sharedlib_from_linklib_cmd=$ECHO ;; esac @@ -6474,7 +6563,7 @@ if ac_fn_c_try_compile "$LINENO"; then : ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } - if test "$ac_status" -eq 0; then + if test 0 -eq "$ac_status"; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 @@ -6482,7 +6571,7 @@ if ac_fn_c_try_compile "$LINENO"; then : ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } - if test "$ac_status" -ne 0; then + if test 0 -ne "$ac_status"; then lt_cv_ar_at_file=@ fi fi @@ -6495,7 +6584,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 $as_echo "$lt_cv_ar_at_file" >&6; } -if test "x$lt_cv_ar_at_file" = xno; then +if test no = "$lt_cv_ar_at_file"; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file @@ -6712,7 +6801,7 @@ old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in - openbsd*) + bitrig* | openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) @@ -6802,7 +6891,7 @@ cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; hpux*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then symcode='[ABCDEGRST]' fi ;; @@ -6835,14 +6924,44 @@ case `$NM -V 2>&1` in symcode='[ABCDGIRSTW]' ;; esac +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" # Handle CRLF in mingw tool chain opt_cr= @@ -6860,21 +6979,24 @@ for ac_symprfx in "" "_"; do # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" @@ -6922,11 +7044,11 @@ _LT_EOF if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST -#elif defined(__osf__) +#elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else @@ -6952,7 +7074,7 @@ lt__PROGRAM__LTX_preloaded_symbols[] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; @@ -6972,13 +7094,13 @@ _LT_EOF mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" + LIBS=conftstm.$ac_objext CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext}; then + test $ac_status = 0; } && test -s conftest$ac_exeext; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS @@ -6999,7 +7121,7 @@ _LT_EOF rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then + if test yes = "$pipe_works"; then break else lt_cv_sys_global_symbol_pipe= @@ -7041,6 +7163,16 @@ fi + + + + + + + + + + @@ -7064,9 +7196,9 @@ fi lt_sysroot= -case ${with_sysroot} in #( +case $with_sysroot in #( yes) - if test "$GCC" = yes; then + if test yes = "$GCC"; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( @@ -7076,8 +7208,8 @@ case ${with_sysroot} in #( no|'') ;; #( *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 -$as_echo "${with_sysroot}" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 +$as_echo "$with_sysroot" >&6; } as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 ;; esac @@ -7089,18 +7221,99 @@ $as_echo "${lt_sysroot:-no}" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 +$as_echo_n "checking for a working dd... " >&6; } +if ${ac_cv_path_lt_DD+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +if test -z "$lt_DD"; then + ac_path_lt_DD_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in dd; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_lt_DD" || continue +if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi + $ac_path_lt_DD_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_lt_DD"; then + : + fi +else + ac_cv_path_lt_DD=$lt_DD +fi + +rm -f conftest.i conftest2.i conftest.out +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 +$as_echo "$ac_cv_path_lt_DD" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 +$as_echo_n "checking how to truncate binary pipes... " >&6; } +if ${lt_cv_truncate_bin+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 +$as_echo "$lt_cv_truncate_bin" >&6; } + + + + + + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +test no = "$enable_libtool_lock" || enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 @@ -7109,24 +7322,25 @@ ia64-*-hpux*) test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) - HPUX_IA64_MODE="32" + HPUX_IA64_MODE=32 ;; *ELF-64*) - HPUX_IA64_MODE="64" + HPUX_IA64_MODE=64 ;; esac fi rm -rf conftest* ;; *-*-irix6*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" @@ -7155,9 +7369,50 @@ ia64-*-hpux*) rm -rf conftest* ;; +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 @@ -7171,7 +7426,14 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) - LD="${LD-ld} -m elf_i386" + case `/usr/bin/file conftest.o` in + *x86-64*) + LD="${LD-ld} -m elf32_x86_64" + ;; + *) + LD="${LD-ld} -m elf_i386" + ;; + esac ;; powerpc64le-*linux*) LD="${LD-ld} -m elf32lppclinux" @@ -7216,7 +7478,7 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" + SAVE_CFLAGS=$CFLAGS CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } @@ -7256,13 +7518,14 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then + if test yes != "$lt_cv_cc_needs_belf"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" + CFLAGS=$SAVE_CFLAGS fi ;; *-*solaris*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 @@ -7274,7 +7537,7 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; } case $lt_cv_prog_gnu_ld in yes*) case $host in - i?86-*-solaris*) + i?86-*-solaris*|x86_64-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) @@ -7283,7 +7546,7 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; } esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD="${LD-ld}_sol2" + LD=${LD-ld}_sol2 fi ;; *) @@ -7299,7 +7562,7 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; } ;; esac -need_locks="$enable_libtool_lock" +need_locks=$enable_libtool_lock if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. @@ -7410,7 +7673,7 @@ else fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 $as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test "x$lt_cv_path_mainfest_tool" != xyes; then +if test yes != "$lt_cv_path_mainfest_tool"; then MANIFEST_TOOL=: fi @@ -7913,7 +8176,7 @@ if ${lt_cv_apple_cc_single_mod+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then + if test -z "$LT_MULTI_MODULE"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the @@ -7931,7 +8194,7 @@ else cat conftest.err >&5 # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. - elif test -f libconftest.dylib && test $_lt_result -eq 0; then + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 @@ -7970,7 +8233,7 @@ else fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 @@ -7999,7 +8262,7 @@ _LT_EOF _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&5 - elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then lt_cv_ld_force_load=yes else cat conftest.err >&5 @@ -8012,32 +8275,32 @@ fi $as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[012][,.]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; esac ;; esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then + if test yes = "$lt_cv_apple_cc_single_mod"; then _lt_dar_single_mod='$single_module' fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= @@ -8045,6 +8308,41 @@ $as_echo "$lt_cv_ld_force_load" >&6; } ;; esac +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -8348,14 +8646,14 @@ if test "${enable_shared+set}" = set; then : *) enable_shared=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_shared=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8379,14 +8677,14 @@ if test "${enable_static+set}" = set; then : *) enable_static=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_static=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8410,14 +8708,14 @@ if test "${with_pic+set}" = set; then : *) pic_mode=default # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for lt_pkg in $withval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8425,8 +8723,6 @@ else fi -test -z "$pic_mode" && pic_mode=default - @@ -8442,14 +8738,14 @@ if test "${enable_fast_install+set}" = set; then : *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8463,11 +8759,63 @@ fi + shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[5-9]*,yes) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 +$as_echo_n "checking which variant of shared library versioning to provide... " >&6; } + +# Check whether --with-aix-soname was given. +if test "${with_aix_soname+set}" = set; then : + withval=$with_aix_soname; case $withval in + aix|svr4|both) + ;; + *) + as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname +else + if ${lt_cv_with_aix_soname+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_with_aix_soname=aix +fi + + with_aix_soname=$lt_cv_with_aix_soname +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 +$as_echo "$with_aix_soname" >&6; } + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + + + + + + + # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" +LIBTOOL_DEPS=$ltmain # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' @@ -8516,7 +8864,7 @@ test -z "$LN_S" && LN_S="ln -s" -if test -n "${ZSH_VERSION+set}" ; then +if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi @@ -8555,7 +8903,7 @@ aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then + if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi @@ -8566,14 +8914,14 @@ esac ofile=libtool can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except MSVC, +# All known linkers require a '.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a -with_gnu_ld="$lt_cv_prog_gnu_ld" +with_gnu_ld=$lt_cv_prog_gnu_ld -old_CC="$CC" -old_CFLAGS="$CFLAGS" +old_CC=$CC +old_CFLAGS=$CFLAGS # Set sane defaults for various variables test -z "$CC" && CC=cc @@ -8582,15 +8930,8 @@ test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +func_cc_basename $compiler +cc_basename=$func_cc_basename_result # Only perform the check for file, if the check method requires it @@ -8605,22 +8946,22 @@ if ${lt_cv_path_MAGIC_CMD+:} false; then : else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -f "$ac_dir/${ac_tool_prefix}file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : @@ -8643,13 +8984,13 @@ _LT_EOF break fi done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac fi -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } @@ -8671,22 +9012,22 @@ if ${lt_cv_path_MAGIC_CMD+:} false; then : else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -f "$ac_dir/file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : @@ -8709,13 +9050,13 @@ _LT_EOF break fi done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac fi -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } @@ -8736,7 +9077,7 @@ esac # Use C for the default configuration in the libtool script -lt_save_CC="$CC" +lt_save_CC=$CC ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -8798,7 +9139,7 @@ if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= -if test "$GCC" = yes; then +if test yes = "$GCC"; then case $cc_basename in nvcc*) lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; @@ -8814,7 +9155,7 @@ else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" + lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins @@ -8844,7 +9185,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then +if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : @@ -8862,17 +9203,18 @@ lt_prog_compiler_pic= lt_prog_compiler_static= - if test "$GCC" = yes; then + if test yes = "$GCC"; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi + lt_prog_compiler_pic='-fPIC' ;; amigaos*) @@ -8883,8 +9225,8 @@ lt_prog_compiler_static= ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac @@ -8900,6 +9242,11 @@ lt_prog_compiler_static= # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac ;; darwin* | rhapsody*) @@ -8970,7 +9317,7 @@ lt_prog_compiler_static= case $host_os in aix*) lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else @@ -8978,10 +9325,29 @@ lt_prog_compiler_static= fi ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac ;; hpux9* | hpux10* | hpux11*) @@ -8997,7 +9363,7 @@ lt_prog_compiler_static= ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' + lt_prog_compiler_static='$wl-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) @@ -9006,9 +9372,9 @@ lt_prog_compiler_static= lt_prog_compiler_static='-non_shared' ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. + # old Intel for x86_64, which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' @@ -9033,6 +9399,12 @@ lt_prog_compiler_static= lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) @@ -9130,7 +9502,7 @@ lt_prog_compiler_static= ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi @@ -9159,7 +9531,7 @@ lt_prog_compiler_static= fi case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: + # For platforms that do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; @@ -9191,7 +9563,7 @@ else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins @@ -9221,7 +9593,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then +if test yes = "$lt_cv_prog_compiler_pic_works"; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; @@ -9253,7 +9625,7 @@ if ${lt_cv_prog_compiler_static_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then @@ -9272,13 +9644,13 @@ else fi fi $RM -r conftest* - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } -if test x"$lt_cv_prog_compiler_static_works" = xyes; then +if test yes = "$lt_cv_prog_compiler_static_works"; then : else lt_prog_compiler_static= @@ -9398,8 +9770,8 @@ $as_echo "$lt_cv_prog_compiler_c_o" >&6; } -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then +hard_links=nottested +if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } @@ -9411,9 +9783,9 @@ $as_echo_n "checking if we can lock with hard links... " >&6; } ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + if test no = "$hard_links"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} need_locks=warn fi else @@ -9456,9 +9828,9 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if @@ -9473,7 +9845,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. - if test "$GCC" != yes; then + if test yes != "$GCC"; then with_gnu_ld=no fi ;; @@ -9481,7 +9853,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; - openbsd*) + openbsd* | bitrig*) with_gnu_ld=no ;; esac @@ -9491,7 +9863,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility @@ -9513,24 +9885,24 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie esac fi - if test "$lt_use_gnu_ld_interface" = yes; then + if test yes = "$lt_use_gnu_ld_interface"; then # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' + wlarc='$wl' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + export_dynamic_flag_spec='$wl--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no - case `$LD -v 2>&1` in + case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... @@ -9543,7 +9915,7 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then + if test ia64 != "$host_cpu"; then ld_shlibs=no cat <<_LT_EOF 1>&2 @@ -9562,7 +9934,7 @@ _LT_EOF case $host_cpu in powerpc) # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) @@ -9578,7 +9950,7 @@ _LT_EOF allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else ld_shlibs=no fi @@ -9588,7 +9960,7 @@ _LT_EOF # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='${wl}--export-all-symbols' + export_dynamic_flag_spec='$wl--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes @@ -9596,61 +9968,89 @@ _LT_EOF exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' link_all_deplibs=yes ;; + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no - if test "$host_os" = linux-dietlibc; then + if test linux-dietlibc = "$host_os"; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no + && test no = "$tmp_diet" then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -9661,42 +10061,47 @@ _LT_EOF lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi case $cc_basename in + tcc*) + export_dynamic_flag_spec='-rdynamic' + ;; xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac @@ -9710,8 +10115,8 @@ _LT_EOF archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -9729,8 +10134,8 @@ _LT_EOF _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -9742,7 +10147,7 @@ _LT_EOF ld_shlibs=no cat <<_LT_EOF 1>&2 -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify @@ -9757,9 +10162,9 @@ _LT_EOF # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -9776,15 +10181,15 @@ _LT_EOF *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac - if test "$ld_shlibs" = no; then + if test no = "$ld_shlibs"; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= @@ -9800,7 +10205,7 @@ _LT_EOF # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported @@ -9808,34 +10213,57 @@ _LT_EOF ;; aix[4-9]*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' - no_entry_flag="" + no_entry_flag= else # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then aix_use_runtimelinking=yes break fi done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi ;; esac @@ -9854,13 +10282,21 @@ _LT_EOF hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes - file_list_spec='${wl}-f,' + file_list_spec='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + hardcode_direct=no + hardcode_direct_absolute=no + ;; + esac - if test "$GCC" = yes; then + if test yes = "$GCC"; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` + collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then @@ -9879,35 +10315,42 @@ _LT_EOF ;; esac shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' else # not using gcc - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' else - shared_flag='${wl}-bM:SRE' + shared_flag='$wl-bM:SRE' fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' fi fi - export_dynamic_flag_spec='${wl}-bexpall' + export_dynamic_flag_spec='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then + if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : @@ -9942,7 +10385,7 @@ fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" + lt_cv_aix_libpath_=/usr/lib:/lib fi fi @@ -9950,17 +10393,17 @@ fi aix_libpath=$lt_cv_aix_libpath_ fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + if test ia64 = "$host_cpu"; then + hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then + if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : @@ -9995,7 +10438,7 @@ fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" + lt_cv_aix_libpath_=/usr/lib:/lib fi fi @@ -10003,21 +10446,33 @@ fi aix_libpath=$lt_cv_aix_libpath_ fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then + no_undefined_flag=' $wl-bernotok' + allow_undefined_flag=' $wl-berok' + if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' fi archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' fi fi ;; @@ -10026,7 +10481,7 @@ fi case $host_cpu in powerpc) # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) @@ -10056,16 +10511,17 @@ fi # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes @@ -10074,18 +10530,18 @@ fi # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' ;; *) # Assume MSVC wrapper @@ -10094,7 +10550,7 @@ fi # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. @@ -10113,24 +10569,24 @@ fi hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + if test yes = "$lt_cv_ld_force_load"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec='' fi link_all_deplibs=yes - allow_undefined_flag="$_lt_dar_allow_undefined" + allow_undefined_flag=$_lt_dar_allow_undefined case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; + ifort*|nagfor*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac - if test "$_lt_dar_can_shared" = "yes"; then + if test yes = "$_lt_dar_can_shared"; then output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" else ld_shlibs=no @@ -10172,33 +10628,33 @@ fi ;; hpux9*) - if test "$GCC" = yes; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + if test yes = "$GCC"; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' + export_dynamic_flag_spec='$wl-E' ;; hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + if test yes,no = "$GCC,$with_gnu_ld"; then + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' + export_dynamic_flag_spec='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes @@ -10206,25 +10662,25 @@ fi ;; hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then + if test yes,no = "$GCC,$with_gnu_ld"; then case $host_cpu in hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) @@ -10236,7 +10692,7 @@ if ${lt_cv_prog_compiler__b+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler__b=no - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then @@ -10255,14 +10711,14 @@ else fi fi $RM -r conftest* - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 $as_echo "$lt_cv_prog_compiler__b" >&6; } -if test x"$lt_cv_prog_compiler__b" = xyes; then - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +if test yes = "$lt_cv_prog_compiler__b"; then + archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi @@ -10270,8 +10726,8 @@ fi ;; esac fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: case $host_cpu in @@ -10282,7 +10738,7 @@ fi *) hardcode_direct=yes hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' + export_dynamic_flag_spec='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. @@ -10293,8 +10749,8 @@ fi ;; irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GCC"; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. @@ -10304,8 +10760,8 @@ $as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " > if ${lt_cv_irix_exported_symbol+:} false; then : $as_echo_n "(cached) " >&6 else - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo (void) { return 0; } @@ -10317,24 +10773,34 @@ else fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 $as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test "$lt_cv_irix_exported_symbol" = yes; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + if test yes = "$lt_cv_irix_exported_symbol"; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' fi else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + ld_shlibs=yes + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out @@ -10349,7 +10815,7 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; } newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; @@ -10357,27 +10823,19 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; } *nto* | *qnx*) ;; - openbsd*) + openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' fi else ld_shlibs=no @@ -10388,33 +10846,53 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; } hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes ;; osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' fi archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' @@ -10425,24 +10903,24 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; } solaris*) no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + wlarc='$wl' + archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) - wlarc='${wl}' - archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + wlarc='$wl' + archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi @@ -10452,11 +10930,11 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; } solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', + # but understands '-z linker_flag'. GCC discards it without '$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + if test yes = "$GCC"; then + whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi @@ -10466,10 +10944,10 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; } ;; sunos4*) - if test "x$host_vendor" = xsequent; then + if test sequent = "$host_vendor"; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi @@ -10518,43 +10996,43 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; } ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='${wl}-z,text' + no_undefined_flag='$wl-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not + # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' + no_undefined_flag='$wl-z,text' + allow_undefined_flag='$wl-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_flag_spec='$wl-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' + export_dynamic_flag_spec='$wl-Bexport' runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; @@ -10569,10 +11047,10 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; } ;; esac - if test x$host_vendor = xsni; then + if test sni = "$host_vendor"; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='${wl}-Blargedynsym' + export_dynamic_flag_spec='$wl-Blargedynsym' ;; esac fi @@ -10580,7 +11058,7 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no +test no = "$ld_shlibs" && can_build_shared=no with_gnu_ld=$with_gnu_ld @@ -10606,7 +11084,7 @@ x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then + if test yes,yes = "$GCC,$enable_shared"; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. @@ -10821,14 +11299,14 @@ esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } -if test "$GCC" = yes; then +if test yes = "$GCC"; then case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; esac case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; + mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in @@ -10844,28 +11322,35 @@ if test "$GCC" = yes; then ;; esac # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. + # and add multilib dir if necessary... lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; + lt_foo = "/" $lt_i lt_foo; } else { lt_count--; } @@ -10879,7 +11364,7 @@ BEGIN {RS=" "; FS="/|\n";} { # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([A-Za-z]:\),\1,g'` ;; + $SED 's|/\([A-Za-z]:\)|\1|g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else @@ -10888,7 +11373,7 @@ fi library_names_spec= libname_spec='lib$name' soname_spec= -shrext_cmds=".so" +shrext_cmds=.so postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -10905,14 +11390,16 @@ hardcode_into_libs=no # flags to be left without arguments need_version=unknown + + case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' + soname_spec='$libname$release$shared_ext$major' ;; aix[4-9]*) @@ -10920,41 +11407,91 @@ aix[4-9]*) need_lib_prefix=no need_version=no hardcode_into_libs=yes - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a(lib.so.V)' # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac shlibpath_var=LIBPATH fi ;; @@ -10964,18 +11501,18 @@ amigaos*) powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) - library_names_spec='${libname}${shared_ext}' + library_names_spec='$libname$shared_ext' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; @@ -10983,8 +11520,8 @@ beos*) bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" @@ -10996,7 +11533,7 @@ bsdi[45]*) cygwin* | mingw* | pw32* | cegcc*) version_type=windows - shrext_cmds=".dll" + shrext_cmds=.dll need_version=no need_lib_prefix=no @@ -11005,8 +11542,8 @@ cygwin* | mingw* | pw32* | cegcc*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ @@ -11022,17 +11559,17 @@ cygwin* | mingw* | pw32* | cegcc*) case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' @@ -11041,8 +11578,8 @@ cygwin* | mingw* | pw32* | cegcc*) *,cl*) # Native MSVC libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' case $build_os in mingw*) @@ -11069,7 +11606,7 @@ cygwin* | mingw* | pw32* | cegcc*) sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=$LIB if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` @@ -11082,8 +11619,8 @@ cygwin* | mingw* | pw32* | cegcc*) esac # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' @@ -11096,7 +11633,7 @@ cygwin* | mingw* | pw32* | cegcc*) *) # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac @@ -11109,8 +11646,8 @@ darwin* | rhapsody*) version_type=darwin need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' @@ -11123,8 +11660,8 @@ dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -11142,12 +11679,13 @@ freebsd* | dragonfly*) version_type=freebsd-$objformat case $version_type in freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' need_version=no need_lib_prefix=no ;; freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' need_version=yes ;; esac @@ -11172,26 +11710,15 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes + shlibpath_overrides_runpath=no sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; @@ -11209,14 +11736,15 @@ hpux9* | hpux10* | hpux11*) dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' @@ -11224,8 +11752,8 @@ hpux9* | hpux10* | hpux11*) dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; @@ -11234,8 +11762,8 @@ hpux9* | hpux10* | hpux11*) dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... @@ -11248,8 +11776,8 @@ interix[3-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -11260,7 +11788,7 @@ irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix @@ -11268,8 +11796,8 @@ irix5* | irix6* | nonstopux*) esac need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= @@ -11288,8 +11816,8 @@ irix5* | irix6* | nonstopux*) esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" hardcode_into_libs=yes ;; @@ -11298,13 +11826,33 @@ linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + hardcode_libdir_flag_spec='-L$libdir' + ;; + # This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -11348,7 +11896,12 @@ fi # before this can be enabled. hardcode_into_libs=yes - # Append ld.so.conf contents to the search path + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" @@ -11368,12 +11921,12 @@ netbsd*) need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH @@ -11383,7 +11936,7 @@ netbsd*) newsos6) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; @@ -11392,58 +11945,68 @@ newsos6) version_type=qnx need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; -openbsd*) +openbsd* | bitrig*) version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" + sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no else - shlibpath_overrides_runpath=yes + need_version=yes fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes ;; os2*) libname_spec='$name' - shrext_cmds=".dll" + version_type=windows + shrext_cmds=.dll + need_version=no need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; rdos*) @@ -11454,8 +12017,8 @@ solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes @@ -11465,11 +12028,11 @@ solaris*) sunos4*) version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then need_lib_prefix=no fi need_version=yes @@ -11477,8 +12040,8 @@ sunos4*) sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) @@ -11499,24 +12062,24 @@ sysv4 | sysv4.3*) ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf + version_type=sco need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' @@ -11534,7 +12097,7 @@ tpf*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes @@ -11542,8 +12105,8 @@ tpf*) uts4*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -11553,20 +12116,35 @@ uts4*) esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no +test no = "$dynamic_linker" && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then +if test yes = "$GCC"; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec fi +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + + + + + + @@ -11663,15 +12241,15 @@ $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || - test "X$hardcode_automatic" = "Xyes" ; then + test yes = "$hardcode_automatic"; then # We can hardcode non-existent directories. - if test "$hardcode_direct" != no && + if test no != "$hardcode_direct" && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && + test no != "$hardcode_minus_L"; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else @@ -11686,12 +12264,12 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } -if test "$hardcode_action" = relink || - test "$inherit_rpath" = yes; then +if test relink = "$hardcode_action" || + test yes = "$inherit_rpath"; then # Fast installation is not supported enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then # Fast installation is not necessary enable_fast_install=needless fi @@ -11701,7 +12279,7 @@ fi - if test "x$enable_dlopen" != xyes; then + if test yes != "$enable_dlopen"; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown @@ -11711,23 +12289,23 @@ else case $host_os in beos*) - lt_cv_dlopen="load_add_on" + lt_cv_dlopen=load_add_on lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen=LoadLibrary lt_cv_dlopen_libs= ;; cygwin*) - lt_cv_dlopen="dlopen" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs= ;; darwin*) - # if libdl is installed we need to link against it + # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : @@ -11765,10 +12343,10 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl else - lt_cv_dlopen="dyld" + lt_cv_dlopen=dyld lt_cv_dlopen_libs= lt_cv_dlopen_self=yes @@ -11776,10 +12354,18 @@ fi ;; + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" + lt_cv_dlopen=shl_load else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } @@ -11818,11 +12404,11 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" + lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" + lt_cv_dlopen=dlopen else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } @@ -11861,7 +12447,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } @@ -11900,7 +12486,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } @@ -11939,7 +12525,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" + lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld fi @@ -11960,21 +12546,21 @@ fi ;; esac - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else + if test no = "$lt_cv_dlopen"; then enable_dlopen=no + else + enable_dlopen=yes fi case $lt_cv_dlopen in dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - save_LIBS="$LIBS" + save_LIBS=$LIBS LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 @@ -11982,7 +12568,7 @@ $as_echo_n "checking whether a program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then : + if test yes = "$cross_compiling"; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 @@ -12029,9 +12615,9 @@ else # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated +/* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif @@ -12061,7 +12647,7 @@ _LT_EOF (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -12081,14 +12667,14 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } - if test "x$lt_cv_dlopen_self" = xyes; then + if test yes = "$lt_cv_dlopen_self"; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self_static+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then : + if test yes = "$cross_compiling"; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 @@ -12135,9 +12721,9 @@ else # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated +/* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif @@ -12167,7 +12753,7 @@ _LT_EOF (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -12188,9 +12774,9 @@ fi $as_echo "$lt_cv_dlopen_self_static" >&6; } fi - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS ;; esac @@ -12234,7 +12820,7 @@ else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) - if test -n "$STRIP" ; then + if test -n "$STRIP"; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 @@ -12262,7 +12848,7 @@ fi - # Report which library types will actually be built + # Report what library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 @@ -12270,13 +12856,13 @@ $as_echo "$can_build_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } - test "$can_build_shared" = "no" && enable_shared=no + test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) - test "$enable_shared" = yes && enable_static=no + test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' @@ -12284,8 +12870,12 @@ $as_echo_n "checking whether to build shared libraries... " >&6; } ;; aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac fi ;; esac @@ -12295,7 +12885,7 @@ $as_echo "$enable_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes + test yes = "$enable_shared" || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } @@ -12309,7 +12899,7 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -CC="$lt_save_CC" +CC=$lt_save_CC @@ -21808,6 +22398,7 @@ enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' @@ -21857,10 +22448,13 @@ compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' @@ -21925,7 +22519,8 @@ finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' +configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`' +configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`' hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' @@ -21976,9 +22571,12 @@ CFLAGS \ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_import \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +lt_cv_nm_interface \ nm_file_list_spec \ +lt_cv_truncate_bin \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_pic \ lt_prog_compiler_wl \ @@ -22013,7 +22611,7 @@ old_striplib \ striplib; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -22040,10 +22638,11 @@ postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec; do +configure_time_dlsearch_path \ +configure_time_lt_sys_library_path; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -22052,19 +22651,16 @@ sys_lib_dlsearch_path_spec; do done ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' -# See if we are running on zsh, and set the options which allow our +# See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then +if test -n "\${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile' @@ -22794,55 +23390,52 @@ $as_echo X"$file" | ;; "libtool":C) - # See if we are running on zsh, and set the options which allow our + # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then + if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi - cfgfile="${ofile}T" + cfgfile=${ofile}T trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# Generated automatically by $as_me ($PACKAGE) $VERSION # NOTE: Changes made to this file will be lost: look at ltmain.sh. + +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit, 1996 + +# Copyright (C) 2014 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of of the License, or +# (at your option) any later version. # -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program or library that is built +# using GNU Libtool, you may include this file under the same +# distribution terms that you use for the rest of that program. # -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# along with this program. If not, see . # The names of the tagged configurations supported by this script. -available_tags="" +available_tags='' + +# Configured defaults for sys_lib_dlsearch_path munging. +: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} # ### BEGIN LIBTOOL CONFIG @@ -22862,6 +23455,9 @@ pic_mode=$pic_mode # Whether or not to optimize for fast installation. fast_install=$enable_fast_install +# Shared archive member basename,for filename based shared library versioning on AIX. +shared_archive_member_spec=$shared_archive_member_spec + # Shell to use when invoking shell scripts. SHELL=$lt_SHELL @@ -22979,18 +23575,27 @@ global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl +# Transform the output of nm into a list of symbols to manually relocate. +global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import + # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix +# The name lister interface. +nm_interface=$lt_lt_cv_nm_interface + # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec -# The root where to search for dependent libraries,and in which our libraries should be installed. +# The root where to search for dependent libraries,and where our libraries should be installed. lt_sysroot=$lt_sysroot +# Command to truncate a binary pipe. +lt_truncate_bin=$lt_lt_cv_truncate_bin + # The name of the directory that contains temporary libtool files. objdir=$objdir @@ -23081,8 +23686,11 @@ hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +# Detected run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path + +# Explicit LT_SYS_LIBRARY_PATH set during ./configure time. +configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path # Whether dlopen is supported. dlopen_support=$enable_dlopen @@ -23175,13 +23783,13 @@ hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# "absolute",i.e impossible to change by setting \$shlibpath_var if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute @@ -23231,6 +23839,65 @@ hardcode_action=$hardcode_action # ### END LIBTOOL CONFIG +_LT_EOF + + cat <<'_LT_EOF' >> "$cfgfile" + +# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + + +# ### END FUNCTIONS SHARED WITH CONFIGURE + _LT_EOF case $host_os in @@ -23239,7 +23906,7 @@ _LT_EOF # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then +if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi @@ -23248,7 +23915,7 @@ _LT_EOF esac -ltmain="$ac_aux_dir/ltmain.sh" +ltmain=$ac_aux_dir/ltmain.sh # We use sed instead of cat because bash on DJGPP gets confused if @@ -23258,165 +23925,6 @@ ltmain="$ac_aux_dir/ltmain.sh" sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) - if test x"$xsi_shell" = xyes; then - sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ -func_dirname ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_basename ()$/,/^} # func_basename /c\ -func_basename ()\ -{\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ -func_dirname_and_basename ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ -func_stripname ()\ -{\ -\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ -\ # positional parameters, so assign one to ordinary parameter first.\ -\ func_stripname_result=${3}\ -\ func_stripname_result=${func_stripname_result#"${1}"}\ -\ func_stripname_result=${func_stripname_result%"${2}"}\ -} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ -func_split_long_opt ()\ -{\ -\ func_split_long_opt_name=${1%%=*}\ -\ func_split_long_opt_arg=${1#*=}\ -} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ -func_split_short_opt ()\ -{\ -\ func_split_short_opt_arg=${1#??}\ -\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ -} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ -func_lo2o ()\ -{\ -\ case ${1} in\ -\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ -\ *) func_lo2o_result=${1} ;;\ -\ esac\ -} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_xform ()$/,/^} # func_xform /c\ -func_xform ()\ -{\ - func_xform_result=${1%.*}.lo\ -} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_arith ()$/,/^} # func_arith /c\ -func_arith ()\ -{\ - func_arith_result=$(( $* ))\ -} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_len ()$/,/^} # func_len /c\ -func_len ()\ -{\ - func_len_result=${#1}\ -} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - -fi - -if test x"$lt_shell_append" = xyes; then - sed -e '/^func_append ()$/,/^} # func_append /c\ -func_append ()\ -{\ - eval "${1}+=\\${2}"\ -} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ -func_append_quoted ()\ -{\ -\ func_quote_for_eval "${2}"\ -\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ -} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 -$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} -fi - - mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" diff --git a/po/Makefile.in b/po/Makefile.in index 6e60221..4671387 100644 --- a/po/Makefile.in +++ b/po/Makefile.in @@ -11,7 +11,7 @@ # Origin: gettext-0.16 PACKAGE = alpine -VERSION = 2.21 +VERSION = 2.21.9 PACKAGE_BUGREPORT = chappa@washington.edu SHELL = /bin/sh @@ -34,13 +34,13 @@ INSTALL_DATA = ${INSTALL} -m 644 # We use $(mkdir_p). # In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as # "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, -# ${SHELL} /run/media/echappa/Work/alpine/alpinegit/install-sh does not start with $(SHELL), so we add it. +# ${SHELL} /home/htodd/alpine/install-sh does not start with $(SHELL), so we add it. # In automake >= 1.10, $(MKDIR_P) is derived from ${MKDIR_P}, which is defined # either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake # versions, $(mkinstalldirs) and $(install_sh) are unused. -mkinstalldirs = $(SHELL) ${SHELL} /run/media/echappa/Work/alpine/alpinegit/install-sh -d -install_sh = $(SHELL) ${SHELL} /run/media/echappa/Work/alpine/alpinegit/install-sh -MKDIR_P = /usr/bin/mkdir -p +mkinstalldirs = $(SHELL) ${SHELL} /home/htodd/alpine/install-sh -d +install_sh = $(SHELL) ${SHELL} /home/htodd/alpine/install-sh +MKDIR_P = .././install-sh -c -d mkdir_p = $(MKDIR_P) GMSGFMT_ = /usr/bin/msgfmt @@ -95,7 +95,7 @@ CATALOGS = @CATALOGS@ mv t-$@ $@ -all: all-yes +all: all-no all-yes: stamp-po all-no: @@ -176,7 +176,7 @@ $(POFILES): $(srcdir)/$(DOMAIN).pot install: install-exec install-data install-exec: -install-data: install-data-yes +install-data: install-data-no if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ for file in $(DISTFILES.common) Makevars.template; do \ @@ -235,7 +235,7 @@ install-strip: install installdirs: installdirs-exec installdirs-data installdirs-exec: -installdirs-data: installdirs-data-yes +installdirs-data: installdirs-data-no if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ else \ @@ -280,7 +280,7 @@ installcheck: uninstall: uninstall-exec uninstall-data uninstall-exec: -uninstall-data: uninstall-data-yes +uninstall-data: uninstall-data-no if test "$(PACKAGE)" = "gettext-tools"; then \ for file in $(DISTFILES.common) Makevars.template; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ From alpine.chappa at gmx.com Sun Nov 19 17:38:12 2017 From: alpine.chappa at gmx.com (Eduardo Chappa) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] HEAD doesn't compile on netbsd-8.0_beta-amd64 In-Reply-To: References: Message-ID: On Sun, 19 Nov 2017, Hisashi T Fujinaka wrote: > On Sun, 19 Nov 2017, Eduardo Chappa wrote: > >> I have made additional changes to configure.ac, and therefore to the >> configure script. I hope this time it will all work out smoothly. > > Still didn't work. Here's the diff file from after I run autoconf on > head. Maybe you need a newer autoconf? I'm really not very versed on > autoconf. Thank you Hisashi. You are right, it was not working. I think I found the problem. It is a script that I run when I update my repository that was not updating everything that was necessary. I just tested compiling from a fresh copy of the latest repository and all works well now. Thank you! -- Eduardo http://bit.ly/2vyvUeF (Web) http://repo.or.cz/alpine.git (Git) RSS: http://bit.ly/2vyL1oo (Web updates) RSS: http://repo.or.cz/alpine.git/rss (Git updates) From dennisdavis at fastmail.fm Mon Nov 20 00:07:50 2017 From: dennisdavis at fastmail.fm (Dennis Davis) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] HEAD doesn't compile on netbsd-8.0_beta-amd64 In-Reply-To: References: Message-ID: On Sun, 19 Nov 2017, Eduardo Chappa wrote: > From: Eduardo Chappa > To: Hisashi T Fujinaka > Cc: Dennis Davis , alpine-info@u.washington.edu > Date: Sun, 19 Nov 2017 18:38:12 -0700 (MST) > Subject: Re: [Alpine-info] HEAD doesn't compile on netbsd-8.0_beta-amd64 ... > Thank you Hisashi. You are right, it was not working. I think I > found the problem. It is a script that I run when I update my > repository that was not updating everything that was necessary. > > I just tested compiling from a fresh copy of the latest repository > and all works well now. Thanks Eduardo. Works for me too, I'm posting this with: Alpine 2.21.9 (BSO 229 2017-11-19) -- Dennis Davis From robin.listas at telefonica.net Tue Nov 21 13:30:40 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] setting up IMAP In-Reply-To: References: Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 El 2017-11-14 a las 17:54 -0600, Mike Miller escribi?: > Let me know if you have any tips. I set up imap using these instructions: > > https://askubuntu.com/questions/346528/easiest-way-to-set-up-an-imap-mail-server So you installed dovecot. I also use dovecot, but on another distro. > I left off the pop3. I made appropriate edits to .pinerc, I think, because > it seems to be working. Next I forwarded local port 143 to port 143 on the > server machine. Why the forwarding? > > One problem -- I frequently get this message when changing folders: > > [The authenticity of host 'localhost (127.0.0.1)' can't be established. > ECDSA key fingerprint is SHA256:Xg9gYL4r/k8OX2RjGb > [> SECURITY PROBLEM: insecure server advertised AUTH=PLAIN<] > Are you sure you want to continue connecting (yes/no)? That's because the certificate is not signed by an authority, it is normal. I use: incoming-folders= ... "Via coitt" {localhost/novalidate-cert/user=cer}in_coitt, "Via ieee" {localhost/novalidate-cert/user=cer}in_ieee, ... The "novalidate-cert" is precissely to cover that problem. > I found something out there about PHP, but I guess I can't use that. Any > ideas? It isn't a big deal, though. It only lingers for a few seconds. PHP? I got lost. - -- Cheers Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iF4EAREIAAYFAloUmwAACgkQja8UbcUWM1ySqwD/e93LGGHvPKDYhgVHwE6tn+va 7B/yleSi981Qw1go2uMA/AwFVKTD2a825YNf7XUKr96Vyx1RDPUfouxDmXWm3M5R =cR98 -----END PGP SIGNATURE----- From thomas at gramstad.no Thu Nov 23 07:28:57 2017 From: thomas at gramstad.no (Thomas Gramstad) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Starting Alpine without password? Message-ID: Each time I start Alpine, I have to enter my password. Is there a setting or way to avoid that, so that Alpine starts without asking me for a password? Thomas Gramstad From alpine.chappa at gmx.com Thu Nov 23 10:19:45 2017 From: alpine.chappa at gmx.com (Eduardo Chappa) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Starting Alpine without password? In-Reply-To: References: Message-ID: On Thu, 23 Nov 2017, Thomas Gramstad wrote: > Each time I start Alpine, I have to enter my password. Is there a > setting or way to avoid that, so that Alpine starts without asking me > for a password? Here is the problem. Alpine saves the passwords in a file. That file encodes the passwords, but not in a secure way. Anyone could decrypt the passwords if they read the source code. In other words, a "bad" hacker could steal your information. This is not secure at all. So how can you save your passwords in a way that makes it impossible for others to get them? The solution Alpine implements is to emcrypt it with a password. That is what Alpine is doing right now. Eliminating the extra password will make Alpine come back to its orginal implementation, that I described in my second paragraph above. In other words, by eliminating the password, you make it possible for others to get your passwords once again. This is a case where two priorities are at a stake: convenience and safety. For example, it might not be convenient to have to unlock the door of your house when you come back home from work late at night, but you do it because you know that that is the only way to guarantee that your belongings will be in your home when you come back. It would be great if you did not have to hunt among your keys to unlock that door, but you do it anyway. This is a case where you prefer safety over convenience. What you are asking is to prioritize convenience over safety: closing the door and not locking it does not protect you. Stealing your passwords has bad consequences for you. Encrypting your password and locking it with a password makes it safe for you. It is the equivalent of closing and locking the door. To open that door you need the key. Similarly to decrypt your password file you need the master password. Enough preaching. Having said all of this, I realize that there are people that prefer convenience over safety, so the next version of Alpine will have a way to eliminate the master password. The default will be the use of a master password, but users will be able to eliminate it on a case by case basis. I imagine this will be a FAQ. The way this will work is as follows. In the SMIME configuration screen, there is a link Manage Password File Key and Certificate which you will have to open. This allows you to manage the key to encrypt your password file. That screen will have a "D delete pwd" command that will allow you to remove the master password as you wish. This is already implemented in the git repository in case you would like to get started right now. Thank you. -- Eduardo http://bit.ly/2vyvUeF (Web) http://repo.or.cz/alpine.git (Git) RSS: http://bit.ly/2vyL1oo (Web updates) RSS: http://repo.or.cz/alpine.git/rss (Git updates) From bob at fanatick.org Thu Nov 23 11:19:43 2017 From: bob at fanatick.org (Bob Bernstein) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Starting Alpine without password? In-Reply-To: References: Message-ID: Excellent discourse Eduardo; a little preaching sometimes can go a long way. Happy Thanksgiving! -- The White Queen, speaking to Alice in Through the Looking-Glass: "Why, sometimes I've believed as many as six impossible things before breakfast." From dennisdavis at fastmail.fm Thu Nov 23 13:01:52 2017 From: dennisdavis at fastmail.fm (Dennis Davis) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Starting Alpine without password? In-Reply-To: References: Message-ID: On Thu, 23 Nov 2017, Eduardo Chappa wrote: > From: Eduardo Chappa > To: Thomas Gramstad > Cc: alpine-info@u.washington.edu > Date: Thu, 23 Nov 2017 11:19:45 -0700 (MST) > Subject: Re: [Alpine-info] Starting Alpine without password? > References: > > On Thu, 23 Nov 2017, Thomas Gramstad wrote: > > > Each time I start Alpine, I have to enter my password. Is there > > a setting or way to avoid that, so that Alpine starts without > > asking me for a password? ... > The way this will work is as follows. In the SMIME configuration > screen, there is a link > > Manage Password File Key and Certificate > > which you will have to open. This allows you to manage the key to > encrypt your password file. That screen will have a "D delete pwd" > command that will allow you to remove the master password as you > wish. > > This is already implemented in the git repository in case you > would like to get started right now. I can certainly see this in: Alpine 2.21.9 (BSO 233 2017-11-22) although I for one don't propose to use this facility. For me, security trumps convenience in this case. -- Dennis Davis From thomas at gramstad.no Thu Nov 23 13:19:14 2017 From: thomas at gramstad.no (Thomas Gramstad) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Starting Alpine without password? In-Reply-To: References: Message-ID: On Thu, 23 Nov 2017, Eduardo Chappa wrote: > On Thu, 23 Nov 2017, Thomas Gramstad wrote: > >> Each time I start Alpine, I have to enter my password. Is >> there a setting or way to avoid that, so that Alpine starts >> without asking me for a password? > > Here is the problem. > > Alpine saves the passwords in a file. That file encodes the passwords, but > not in a secure way. Anyone could decrypt the passwords if they read the > source code. In other words, a "bad" hacker could steal your information. > This is not secure at all. > > So how can you save your passwords in a way that makes it impossible for > others to get them? The solution Alpine implements is to emcrypt it with a > password. That is what Alpine is doing right now. > > Eliminating the extra password will make Alpine come back to its orginal > implementation, that I described in my second paragraph above. In other > words, by eliminating the password, you make it possible for others to get > your passwords once again. > > This is a case where two priorities are at a stake: convenience and safety. > For example, it might not be convenient to have to unlock the door of your > house when you come back home from work late at night, but you do it because > you know that that is the only way to guarantee that your belongings will be > in your home when you come back. It would be great if you did not have to > hunt among your keys to unlock that door, but you do it anyway. This is a > case where you prefer safety over convenience. What you are asking is to > prioritize convenience over safety: closing the door and not locking it does > not protect you. > > Stealing your passwords has bad consequences for you. Encrypting your > password and locking it with a password makes it safe for you. It is the > equivalent of closing and locking the door. To open that door you need the > key. Similarly to decrypt your password file you need the master password. > > Enough preaching. Preaching is good, only I should have specified that I am asking in the context of my private home stationary computer, which is used only by me, residing in a home inhabited only by me. And not, e.g., a shared computer environment at work. > Having said all of this, I realize that there are people that prefer > convenience over safety, so the next version of Alpine will have a way to > eliminate the master password. The default will be the use of a master > password, but users will be able to eliminate it on a case by case basis. I > imagine this will be a FAQ. > > The way this will work is as follows. In the SMIME configuration screen, > there is a link > > Manage Password File Key and Certificate > > which you will have to open. This allows you to manage the key to encrypt > your password file. That screen will have a "D delete pwd" command that will > allow you to remove the master password as you wish. > > This is already implemented in the git repository in case you would like to > get started right now. > > Thank you. Thanks, I'll look into this. Thomas Gramstad From bob at fanatick.org Thu Nov 23 13:30:01 2017 From: bob at fanatick.org (Bob Bernstein) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Starting Alpine without password? In-Reply-To: References: Message-ID: On Thu, 23 Nov 2017, Dennis Davis wrote: > I can certainly see this in: > Alpine 2.21.9 (BSO 233 2017-11-22) I have a shell account whose vendor defaults the mail file system -- in the user's home dir -- to maildir. I built alpine with the md patch. I have in my alpine config: Inbox Path = #md/INBOX ...which seems to work just fine. _Except_ I am not challenged to unlock my master password when I open that "INBOX." When I choose to open another incoming mail folder (there are two of those besides the INBOX) -- which are not set up as maildir -- I am asked to unlock my master password. I'm not complaining Eduardo. The current behaviour is fine by me. But I thought it might constitute evidence of a possible weakness in the password system. fwiw: I log in using an SSH pubkey. All best, and Thanks! -- The White Queen, speaking to Alice in Through the Looking-Glass: "Why, sometimes I've believed as many as six impossible things before breakfast." From robin.listas at telefonica.net Thu Nov 23 13:30:45 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Starting Alpine without password? In-Reply-To: References: Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Thursday, 2017-11-23 at 22:19 +0100, Thomas Gramstad wrote: > On Thu, 23 Nov 2017, Eduardo Chappa wrote: >> On Thu, 23 Nov 2017, Thomas Gramstad wrote: > > Preaching is good, only I should have specified that I am asking in the > context of my private home stationary computer, which is used only by me, > residing in a home inhabited only by me. > And not, e.g., a shared computer environment at work. Even in that case, I use strong passwords. There can be visitors, wanted or unwanted. After all, a master password is only used once. - -- Cheers, Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAloXPgUACgkQtTMYHG2NR9XTIwCfaQYmKpL23UPwSf0kErWw7xdu uAoAn27QnQTXIgnflLupiU9wNzCbVubN =Hsjg -----END PGP SIGNATURE----- From alpine.chappa at gmx.com Fri Nov 24 11:13:07 2017 From: alpine.chappa at gmx.com (Eduardo Chappa) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Closing website Message-ID: Dear Alpinists, my web site provider moved to a new business model, where somehow a free site is a "learning site" and as such they can interrupt the free service and put sites to sleep, and not provide the service they agreed to provide. They claim that they put sites to sleep and that I can determine when that will happen, and that this will be for 1 hour only. However, for some reason they are working to make the current 4 hours a site sleeps to be the 1 hour they promised. At this time my web site is inactive and will be sleeping for about 9 more hours. As soon as it is active I will close the account and remove the site. The official site for the Alpine source code will be the git repository. In regards to the patches, I will try to find a different way to distribute them. Thank you. -- Eduardo http://repo.or.cz/alpine.git (Git) RSS: http://repo.or.cz/alpine.git/rss (Git updates) From robin.listas at telefonica.net Fri Nov 24 11:31:40 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Closing website In-Reply-To: References: Message-ID: On 2017-11-24 20:13, Eduardo Chappa wrote: > Dear Alpinists, > > ? my web site provider moved to a new business model, where somehow a > free site is a "learning site" and as such they can interrupt the free > service and put sites to sleep, and not provide the service they agreed > to provide. > > ? They claim that they put sites to sleep and that I can determine when > that will happen, and that this will be for 1 hour only. However, for > some reason they are working to make the current 4 hours a site sleeps > to be the 1 hour they promised. > > ? At this time my web site is inactive and will be sleeping for about 9 > more hours. As soon as it is active I will close the account and remove > the site. The official site for the Alpine source code will be the git > repository. > > ? In regards to the patches, I will try to find a different way to > distribute them. Maybe Sourceforge? You can not place a webpage, but a description is possible. -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 188 bytes Desc: OpenPGP digital signature URL: From mbmiller+l at gmail.com Sat Nov 25 08:29:43 2017 From: mbmiller+l at gmail.com (Mike Miller) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] setting up IMAP In-Reply-To: References: Message-ID: On Tue, 21 Nov 2017, Carlos E. R. wrote: > El 2017-11-14 a las 17:54 -0600, Mike Miller escribi?: > >> Let me know if you have any tips. I set up imap using these instructions: >> >> https://askubuntu.com/questions/346528/easiest-way-to-set-up-an-imap-mail-server > > So you installed dovecot. > I also use dovecot, but on another distro. > >> I left off the pop3. I made appropriate edits to .pinerc, I think, because >> it seems to be working. Next I forwarded local port 143 to port 143 on the >> server machine. > > Why the forwarding? For encryption security. I read in an old Alpine-Info that someone was using that and Mark Crispin liked the idea. He thought it might work better than Alpine built-in ssh: http://mailman13.u.washington.edu/pipermail/alpine-info/2009-February/001745.html >> One problem -- I frequently get this message when changing folders: >> >> [The authenticity of host 'localhost (127.0.0.1)' can't be established. >> ECDSA key fingerprint is SHA256:Xg9gYL4r/k8OX2RjGb >> [> SECURITY PROBLEM: insecure server advertised AUTH=PLAIN<] >> Are you sure you want to continue connecting (yes/no)? > > That's because the certificate is not signed by an authority, it is normal. > > I use: > > incoming-folders= > ... > "Via coitt" {localhost/novalidate-cert/user=cer}in_coitt, > "Via ieee" {localhost/novalidate-cert/user=cer}in_ieee, > ... > > The "novalidate-cert" is precissely to cover that problem. Yep, I did get that figured out. Also, thanks to help from Joshua Miller on this list (see below), I did learn to use IMAPS, port 993, instead of ordinary IMAP. >> I found something out there about PHP, but I guess I can't use that. >> Any ideas? It isn't a big deal, though. It only lingers for a few >> seconds. > > PHP? I got lost. I think I was lost, literally: When I googled the error message, almost all of the hits were to PHP discussion threads. It took me awhile to figure out what had happened. Thanks for the reply, Carlos! I include below the off-list messages with Joshua Miller below. He probably did not intend to write to me alone, and I didn't realize I wasn't replying to the list until the end. Date: Fri, 17 Nov 2017 17:57:52 From: Mike Miller To: Joshua Miller Subject: Re: [Alpine-info] setting up IMAP On Wed, 15 Nov 2017, Mike Miller wrote: > On Tue, 14 Nov 2017, Joshua Miller wrote: > >> IMAP can also be accessed via IMAPS, which is like HTTPS - it's IMAP >> over SSL/TLS. If you installed stuff via the ubuntu repositories (ex. >> using apt or something like that), it probably created a self-signed >> cert for you already and probably put a config in place that has info >> on how to enable IMAPS. How that's done will depend on the mail server >> you use, of course. >> >> If you use dovecot, the necessary config files will probably be >> /etc/dovecot/conf.d/10-master.conf and /etc/dovecot/conf.d/10-ssl.conf. >> It might already be working (try connecting to port 993 on the mail >> server). You might need to open the iptables firewall for that port >> too. >> >> That should be just as secure as tunneling it over ssh, but it'll be >> using a native protocol, and you'll be able to use it from other hosts >> without needing to setup the ssh tunnel (ex. from your smartphone via >> your wifi network if you want). > > > That sounds appealing, but it looks like it could take hours to figure > it all out. It is not running out of the box. I think I'm going to try > to do it anyway. Yes, it was quite an adventure. I still have more to learn about TLS/SSL, but I did get it to work. I wasn't able to get around the /novalidate-cert issue, though. How can that be done? Is there a way to fix that without paying? Thanks for the help, Joshua! Mike Date: Fri, 17 Nov 2017 18:03:47 From: Mike Miller To: Joshua Miller Subject: Re: [Alpine-info] setting up IMAP On Fri, 17 Nov 2017, Mike Miller wrote: > Yes, it was quite an adventure. I still have more to learn about > TLS/SSL, but I did get it to work. > > I wasn't able to get around the /novalidate-cert issue, though. How can > that be done? Is there a way to fix that without paying? By the way, I used the instructions in the second answer here (by nietonfir) to create a cert and key: https://askubuntu.com/questions/49196/how-do-i-create-a-self-signed-ssl-certificate Mike Date: Fri, 17 Nov 2017 18:05:15 From: Mike Miller To: Joshua Miller Subject: Re: [Alpine-info] setting up IMAP I just realized that you didn't reply to the list so all of this was just between the two of us. Is that what you wanted? Mike From robin.listas at telefonica.net Sun Nov 26 07:15:50 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Could you help me analyze what is happening? Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm running "alpine -d imap=4" trying to catch an error in the imap server of my ISP. What happens, when using Thunderbird, is that the contents of the folder suddenly disappear, and I have to send myself an email to that account to make them reappear. I told this to my ISP support, and basically they said, looking at their logs, was that Thunderbird was using too many connections and the server got confused. Configure Th to make a single connection. But even in that case, the problem continues, albeit less often. In Alpine, I configured the same account and run Alpine using "alpine -d imap=4", and I got a few incidents captured (they are much more rare with Alpine). This is one. I get in the log and screen: IMAP DEBUG 15:35:07 11/26: * NO Internal error occurred. Refer to server log for more information. [2017-11-26 15:35:07] After that, alpine seems to try to read the folder and locks. I had to kill it. Log is here: . Search for "error", you'll get the line above. Other times the symptoms are similar to those in Thunderbird. I have another log of that, but I haven't uploaded that one, it covers several days and a lot of that will not be related to the incidents. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAloa2qYACgkQtTMYHG2NR9XsLQCcD62t/9bznQYIH0TLeqRQOl3M K50AnRZa2PwWvTwYOAcyc/M9OgwtIe1x =E2Hr -----END PGP SIGNATURE----- From robin.listas at telefonica.net Sun Nov 26 07:35:07 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Could you help me analyze what is happening? In-Reply-To: References: Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sunday, 2017-11-26 at 16:15 +0100, Carlos E. R. wrote: > Other times the symptoms are similar to those in Thunderbird. I have > another log of that, but I haven't uploaded that one, it covers several > days and a lot of that will not be related to the incidents. Another issue, maybe related: 1741 17-11-26 00:28 To: oS-OT (7880) . [opensuse-offtopic] About taxes A 1742 17-11-26 14:13 Per Jessen (5805) . |-> 1743 17-11-26 08:23 Patrick Shanahan (8603) | |-> 1744 17-11-26 15:22 To: openSUSE off topic mail (7885) | \-> A 1745 17-11-26 15:06 Per Jessen (5885) . \-> 1746 17-11-26 15:34 To: openSUSE off topic mail (9072) |-> A 1747 17-11-26 17:18 ellanios82 (7475) . \-> 1748 17-11-26 16:22 To: oS-OT (8226) |-> 1749 17-11-26 16:22 To: oS-OT (8668) \-> N 1750 (0) <================ 1751 17-11-26 00:16 To: opensuse-offtopic@opensu (7598) . [opensuse-offtopic] After DNA test, California man freed from prison in 1978 doubl A 1752 17-11-26 12:09 Xen (5225) . \-> 1753 17-11-26 15:53 To: openSUSE off topic mail (7802) . \-> A 1754 17-11-26 09:05 Billie Walsh (7272) . \-> 1755 17-11-26 10:12 James Bunnell (7348) |-> N 1756 17-11-26 16:16 To: openSUSE off topic mail (6924) \-> See the empty post there? (I have log of that incident for posting if asked. (pine-debug-imap-5-empty-email)). It disapeared later. Basically, exit the folder and enter it again. Other times when I send a post to that list I see it twice in Alpine, but one of them doesn't display. Then it disapears, so it is another server hiccup. But I do not know what to look for in those logs. The only evident one is the one that says there is a server error and the timestamp - that one I will forward to the ISP, but I'd like opinions from here, to have ammunition ;-) - -- Cheers, Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAloa3ysACgkQtTMYHG2NR9WZFQCghFSeBJW9y4v7S3LgRwi7UA/i CJ0AmwVA7ckm3IkiXB2rStx1xO3MF34g =ztAI -----END PGP SIGNATURE----- From robin.listas at telefonica.net Sun Nov 26 10:03:48 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Could you help me analyze what is happening? In-Reply-To: References: Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sunday, 2017-11-26 at 16:35 +0100, Carlos E. R. wrote: > On Sunday, 2017-11-26 at 16:15 +0100, Carlos E. R. wrote: > >> Other times the symptoms are similar to those in Thunderbird. I have >> another log of that, but I haven't uploaded that one, it covers several >> days and a lot of that will not be related to the incidents. > > Another issue, maybe related: Weird, the first part of this message did not make to the list. Trying again: I'm running "alpine -d imap=4" trying to catch an error in the imap server of my ISP. What happens, when using Thunderbird, is that the contents of the folder suddenly disappear, and I have to send myself an email to that account to make them reappear. I told this to my ISP support, and basically they said, looking at their logs, was that Thunderbird was using too many connections and the server got confused. Configure Th to make a single connection. But even in that case, the problem continues, albeit less often. In Alpine, I configured the same account and run Alpine using "alpine -d imap=4", and I got a few incidents captured (they are much more rare with Alpine). This is one. I get in the log and screen: IMAP DEBUG 15:35:07 11/26: * NO Internal error occurred. Refer to server log for more information. [2017-11-26 15:35:07] After that, alpine seems to try to read the folder and locks. I had to kill it. Log is here: . Search for "error", you'll get the line above. Other times the symptoms are similar to those in Thunderbird. I have another log of that, but I haven't uploaded that one, it covers several days and a lot of that will not be related to the incidents. - -- Cheers, Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlobAhMACgkQtTMYHG2NR9UPWQCgmB8AS468EYYJYAzQbvV1Geyr y84AoIlqAA9+rs58r8QCrLjnGYpZmXKz =+4T/ -----END PGP SIGNATURE----- From alpine.chappa at gmx.com Sun Nov 26 12:24:09 2017 From: alpine.chappa at gmx.com (Eduardo Chappa) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Could you help me analyze what is happening? In-Reply-To: References: Message-ID: On Sun, 26 Nov 2017, Carlos E. R. wrote: > I'm running "alpine -d imap=4" trying to catch an error in the imap > server of my ISP. I wish you had run alpine -d 9 instead, but what the log shows is that after the internal error, that the mailbox reports 1741 new messages (there were 1742 messages. Now there are 1742 + 1741 = 3483 messages.) Above all there is a message that some messages were expunged, but the server never announces them. That announcement is supposed to come through a sequence of untagged replies from the server. Something like * 123 EXPUNGED * 124 EXPUNGED etc. After that, I cannot get the log very well. Alpine is requesting for flags from messags in the 600 range. I don't know why. It does it several times, I don't know why. However, investigate why the server does not announce which messages were expunged. -- Eduardo http://repo.or.cz/alpine.git (Git) RSS: http://repo.or.cz/alpine.git/rss (Git updates) From robin.listas at telefonica.net Sun Nov 26 13:14:19 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Could you help me analyze what is happening? In-Reply-To: References: Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sunday, 2017-11-26 at 13:24 -0700, Eduardo Chappa wrote: > On Sun, 26 Nov 2017, Carlos E. R. wrote: > >> I'm running "alpine -d imap=4" trying to catch an error in the imap server >> of my ISP. > > I wish you had run alpine -d 9 instead, Well, I have now. I restarted like that, "alpine -d 9" and alpine responded: [Debug file: /home/cer/.pine-debug1 (level=9 imap=4)] > but what the log shows is that after > the internal error, that the mailbox reports 1741 new messages (there were > 1742 messages. Now there are 1742 + 1741 = 3483 messages.) > > Above all there is a message that some messages were expunged, but the server > never announces them. That announcement is supposed to come through a > sequence of untagged replies from the server. Something like > > * 123 EXPUNGED > * 124 EXPUNGED > > etc. That could be the event at the server when all email disapears. When the log ends, I had to kill alpine to get out. > > After that, I cannot get the log very well. Alpine is requesting for flags > from messags in the 600 range. I don't know why. It does it several times, I > don't know why. However, investigate why the server does not announce which > messages were expunged. Yeah, but I can't, the server is my ISP. I have restarted alpine with that setting you suggested, and we'll see what it captures at the next event. What I expect is finding that the server is acting up, that it is broken, and being able to prove it to them. - -- Cheers, Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlobLqsACgkQtTMYHG2NR9V2xwCgl0XX+rOfvBe0so/lcBmRTnVD e58An28sUHIkNWcQ3MZhYij2oMzU2DiM =bwjB -----END PGP SIGNATURE----- From alpine.chappa at gmx.com Sun Nov 26 13:18:54 2017 From: alpine.chappa at gmx.com (Eduardo Chappa) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Could you help me analyze what is happening? In-Reply-To: References: Message-ID: Carlos, just to confirm. There are no two sessions running on the same mailbox, right? Alpine is the only client accessing that box. Right? -- Eduardo http://repo.or.cz/alpine.git (Git) RSS: http://repo.or.cz/alpine.git/rss (Git updates) From robin.listas at telefonica.net Sun Nov 26 13:25:31 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Could you help me analyze what is happening? In-Reply-To: References: Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sunday, 2017-11-26 at 14:18 -0700, Eduardo Chappa wrote: > Carlos, just to confirm. > > There are no two sessions running on the same mailbox, right? Alpine is the > only client accessing that box. Right? I hope there is only one, from Alpine. I have disabled refresh in Thunderbird, so as long as I don't click in this folder in Th, Th should not access it at all. But I can not guarantee it. The alternative is exiting Th, or removing this account entirely, but it is something I'd hate to do. I use Th to see emails with links or photos. - -- Cheers, Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlobMUsACgkQtTMYHG2NR9Wn/ACbB6yXSbeOZ2Px+dE4boMmUGdH /98An0Y/aWAm5J7JDZAk6WjIGm86S0yt =GzkR -----END PGP SIGNATURE----- From alpine.chappa at gmx.com Sun Nov 26 13:31:57 2017 From: alpine.chappa at gmx.com (Eduardo Chappa) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Could you help me analyze what is happening? In-Reply-To: References: Message-ID: On Sun, 26 Nov 2017, Carlos E. R. wrote: > On Sunday, 2017-11-26 at 14:18 -0700, Eduardo Chappa wrote: > >> Carlos, just to confirm. >> >> There are no two sessions running on the same mailbox, right? Alpine is >> the only client accessing that box. Right? > > I hope there is only one, from Alpine. > > I have disabled refresh in Thunderbird, so as long as I don't click in > this folder in Th, Th should not access it at all. > > But I can not guarantee it. > > The alternative is exiting Th, or removing this account entirely, but it > is something I'd hate to do. I use Th to see emails with links or > photos. For purposes of debugging, could you reproduce the problem with Thunderbird closed. I think the server is trying to tell you that another program expunged messages from the folder, but somehow you need to rung a NOOP command in your mailbox to get which messages were deleted.... -- Eduardo http://bit.ly/2vyvUeF (Web) http://repo.or.cz/alpine.git (Git) RSS: http://bit.ly/2vyL1oo (Web updates) RSS: http://repo.or.cz/alpine.git/rss (Git updates) From robin.listas at telefonica.net Sun Nov 26 13:56:29 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Could you help me analyze what is happening? In-Reply-To: References: Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sunday, 2017-11-26 at 14:31 -0700, Eduardo Chappa wrote: > On Sun, 26 Nov 2017, Carlos E. R. wrote: >> On Sunday, 2017-11-26 at 14:18 -0700, Eduardo Chappa wrote: >> >>> Carlos, just to confirm. >>> >>> There are no two sessions running on the same mailbox, right? Alpine is >>> the only client accessing that box. Right? >> >> I hope there is only one, from Alpine. >> >> I have disabled refresh in Thunderbird, so as long as I don't click in >> this folder in Th, Th should not access it at all. >> >> But I can not guarantee it. >> >> The alternative is exiting Th, or removing this account entirely, but it >> is something I'd hate to do. I use Th to see emails with links or photos. > > For purposes of debugging, could you reproduce the problem with Thunderbird > closed. I think the server is trying to tell you that another program > expunged messages from the folder, but somehow you need to rung a NOOP > command in your mailbox to get which messages were deleted.... It may take days to reproduce. I can remove this account from Th. [...] Ok, just lied and reconfigured it to "imap.telefonica.net.example", this should be enough :-) - -- Cheers, Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlobOI0ACgkQtTMYHG2NR9V31ACcDlioCziN88mR+htq+vK8kzsA XXgAoIOZ7a6eC6hGcWZr/hhPb3o1qU0d =bsZ7 -----END PGP SIGNATURE----- From alpine.chappa at gmx.com Sun Nov 26 13:59:44 2017 From: alpine.chappa at gmx.com (Eduardo Chappa) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Could you help me analyze what is happening? In-Reply-To: References: Message-ID: On Sun, 26 Nov 2017, Carlos E. R. wrote: > It may take days to reproduce. > > I can remove this account from Th. [...] Ok, just lied and reconfigured > it to "imap.telefonica.net.example", this should be enough :-) Ok, thank you. In the mean time I will see what can Alpine do to avoid this issue in the future. -- Eduardo http://repo.or.cz/alpine.git (Git) RSS: http://repo.or.cz/alpine.git/rss (Git updates) From robin.listas at telefonica.net Tue Nov 28 04:41:39 2017 From: robin.listas at telefonica.net (Carlos E. R.) Date: Tue Jun 12 15:15:05 2018 Subject: [Alpine-info] Could you help me analyze what is happening? In-Reply-To: References: Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sunday, 2017-11-26 at 14:59 -0700, Eduardo Chappa wrote: > On Sun, 26 Nov 2017, Carlos E. R. wrote: > >> It may take days to reproduce. >> >> I can remove this account from Th. [...] Ok, just lied and reconfigured it >> to "imap.telefonica.net.example", this should be enough :-) > > Ok, thank you. In the mean time I will see what can Alpine do to avoid this > issue in the future. Ok, I got a capture. Several events: "phantom posts": posts that do not open, and on a second check, there is another copy that does open, and then the first copy disapears. And at the end, the entire folder disapears. I send myself a post from another account, subject "Awake", dated 17-11-27 20:23 But the log has 51038905 bytes, 1767724 compressed. I can try mail it direct to you or upload at google drive. - -- Cheers, Carlos E. R. (from openSUSE 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlodWYsACgkQtTMYHG2NR9WL/QCfQMcQNyyEn8UMNXm6ViLP9WrT fVUAn0x7g+b2o6EEftuNaElZkHCgjwwS =4xYh -----END PGP SIGNATURE-----